Loading ...
Loading ...
Loading ...
324
38.4 Restore a Configuration File
Use this screen to restore a previously saved configuration from your computer to the Switch.
Figure 229 Management > Maintenance > Restore Configuration
Type the path and file name of the configuration file you wish to restore in the File Path text box or
click Browse to locate it. After you have specified the file, click Restore. "config" is the name of
the configuration file on the Switch, so your backup configuration file is automatically renamed
when you restore using this screen.
38.5 Backup a Configuration File
Use this screen to save and store your current device settings.
Backing up your Switch configurations allows you to create various “snap shots” of your device from
which you may restore at a later date.
Back up your current Switch configuration to a computer using the Backup Configuration screen.
Apply Click Apply to save your changes to the Switch’s run-time memory. The Switch loses
these changes if it is turned off or loses power, so use the Save link on the top
navigation panel to save your changes to the non-volatile memory when you are done
configuring.
Cancel Click Cancel to begin configuring this screen afresh.
Firmware Choose to upload the new firmware to (Firmware) 1 or (Firmware) 2.
File Path Type the path and file name of the firmware file you wish to upload to the Switch in the
File Path text box or click Browse to locate it.
Upgrade Click Upgrade to load the new firmware. Firmware upgrades are only applied after a
reboot. To reboot, go to Management > Maintenance > Reboot System and click
Config 1, Config 2 or Factory Default (Config 1, Config 2 and Factory Default
are the configuration files you want the Switch to use when it restarts).
Table 157 Management > Maintenance > Firmware Upgrade
LABEL DESCRIPTION
Loading ...
Loading ...
Loading ...