Loading ...
Loading ...
Loading ...
11
Schematic diagram of wall mounted installation of industrial machine
➢ Remove the DIN-Rail mounting plate on the rear board of the Switch;
➢ Install the wall mounting board on the Switch as shown below.
➢ Four wall screws are required to mount the Switch on the wall, as shown in
the figure above.
➢ When fixing the screws to the wall, do not screw the screws into the wall
completely. Leave a space of about 2 mm for sliding the wall panel between
the wall and the screws.
➢ After securing the screws to the wall, place the 4 screw heads through most
of the keyhole, then place the Switch vertically and tighten the screws to
increase stability.