Loading ...
Loading ...
Loading ...
en Installation instructions
16
15.8 Combining with other appliances
Observe the information on Seamless Combinaton.
The vacuuming drawer must always be fitted to a fixed
unit base.
The vacuuming drawer must not be placed on any
other drawer or on the metal steaming tray.
The installation of the Seamless decorative panels can
be found in the installation instructions for the decorat-
ive panels.
15.9 Installation
Preparing the appliance
A pump that contains oil is installed in the appliance. If
the incline is too great, this oil may flow out of the
pump. Do not tip the appliance or upend it.
ATTENTION!
The oil from the vacuum pump may leak out when it is
tipped or tilted, and may damage the appliance.
▶ Do not move the appliance if the transport locks for
the pump are not installed.
▶ When uninstalling the appliance, secure the trans-
port locks again before moving the appliance.
Requirement:Use a suitable tool to remove the trans-
port locks and install the oil filter.
1.
Carefully lift the appliance out of the packaging.
2.
Remove the transport lock for the pump from the
top of the appliance.
3.
Secure the transport lock to the rear of the appli-
ance for further use.
4.
Install the oil filter.
5.
Place the lid into the opening and move it to the left.
6.
WARNING‒Risk of tipping!
After removing the transportation lock, the drawer
may open and the appliance may tip over.
▶ Keep the drawer closed.
▶ Weigh down the appliance with a weight.
▶ Only open the drawer if the tilt protection is in-
stalled.
Remove the transport lock screws.
7.
Insert the power cord at the rear of the appliance.
Loading ...
Loading ...
Loading ...