Loading ...
Loading ...
Loading ...
5
eyeglasses.
Moving parts present risks –Keep your face, hair, clothing, hands, and feet away from moving parts. All
guards and safety attachments must be installed properly before using the unit. Shut off and disconnect
cord before touching any parts other than handles and switch.
Surfaces-This snow thrower is intended for use on paved surfaces. Do not use on gravel, stone, or other
unpaved surfaces unless the snow thrower is adjusted for such surfaces according to the instructions
given in the operators manual.
Avoid accidental starting –Make sure the switch is in the off position before plugging in the unit. Do not
carry the snow thrower with your finger on the switch.
Body position-Maintain proper footing and balance at all times. Place heels firmly on the ground and
tightly grasp the handle bar. Watch for uneven surfaces and do not over reach. In case you fall or collide
with the snow thrower, inspect the unit for damage. When steeping backwards, be careful to avoid
obstacles beneath your feet or behind you to avoid falling.
Snow Thrower Use and Care
Know your snow blower-Familiarize yourself with the main parts of your snow thrower. Read the
operators manual carefully. Learn your snow throwers applications and limitations as well as specific
potential hazards related to this machine. Do not use this machine for any purpose other than one for
which it was designed. Otherwise, it may cause mechanical defaults, serious damage or personal injury.
Preliminary unit inspection –Thoroughly inspect the unit before use. Make sure all the parts are secure
and installed correctly. If you notice any abnormalities, do not use the machine until it has been properly
repaired. Always perform a test run the first time you use the snow thrower or after replacing parts to
ensure that unit is functioning properly.
Preliminary area inspection-Clear the area to be plowed before each use. Remove all objects such as
rocks, broken glass, nails, wire, or string which can be thrown by or become entangled in the snow
thrower. Keep the area of operation clear of other people and pets.
Excessive force –The snow thrower was designed to respond at a certain rate for various snow
conditions for optimum safety band performance. Do not force it; keep pressure constant.
Malfunctioning switch-Do not use the snow blower if the switch does not turn it on and off. Any
electrical appliance that can not be controlled by the switch is not safe to use and must be repaired.
Hitting an object-If the snow thrower accidentally strikes an object, stop the snow thrower. Inspect for
damage; repair or replace any damaged part before restarting and operating the snow thrower.
Discharge chute safety -Never direct the snow discharge chute at the operator, at bystanders, at vehicles
or at windows. Thrown snow and foreign objects accidentally picked up by the snow thrower can cause
serious damage and personal injury. Do not use your hands to unclog the discharge chute. Stop the
motor before removing debris.
Abnormal operation-If you notice the snow thrower running in an unstable state or hear abnormal
sounds from machine，stop the machine, disconnect the power immediately, and contact your original
distributor.
Noise control-When using the snow thrower, you must respect local laws and regulations regarding
noise control and environmental protection. To avoid noise disturbance, you should carefully decide
upon an appropriate operation time and consider the surrounding conditions.
When work is completed -Disconnected the snow thrower from the power source when not in use, when
changing accessories, and before performing any maintenance.
Store safety-Store snow thrower indoors in a dry area between uses. Keep in a locked area where
children and unauthorized users can not gain access. Do not store the machine while it is still connected
to the power source. It may cause damage and injury.
Maintain for safety and longevity-Check for misalignment or binding of moving parts, breakage of parts,
and any other conditions that may affect the units operation. If damaged, repair or replace the damaged
part before use. Use only those replacement parts made for your model. When replacing any parts, you
must strictly observe the instructions and procedures described in this manual. Special care should be
paid to any rubber parts, since these parts may increase the engine load and decrease its mechanical
power if damaged.
Loading ...
Loading ...
Loading ...