Loading ...
Loading ...
Loading ...
12
MAINTENANCE
WARNING
Make sure to turn off the switch and disconnect the extension cord before performing any maintenance task
on your snow thrower.
Run the snow thrower for a few minutes to melt away any snow on the snow thrower. Turn the snow
thrower's power off.
Disconnect the extension cord from the snow thrower.
Examine the extension cord thoroughly for signs of wear or damage. Replace it if it is worn or damaged.
Examine the snow thrower thoroughly for worn, loose bolts or damaged parts. For repairing or replacing
parts, contact customer service.
Store the extension cord with the snow thrower.
Store the unit in a locked and dry or high and dry place to prevent unauthorized use/damage and keep
out of the reach of children. Store the instruction manual along with unit for future use.
TROUBLESHOOTING
Problem Possible Causes
Remed
y
WARNING - Before attempting to make any inspections, repairs or adjustments, stop the snow
thrower, wait for all moving parts to stop moving and carefully disconnect the AC extension cord from
the power source.
No start
condition,
won't not
turn on
1
No power from AC
power source
1
Connect to known good AC power source
2
Extension cord not
connecte
d
2
Securely connect extension cord at power source
and snow throwe
r
3
Extension cord faulty 3
Connect a known good extension cord
4
Improper starting
procedure
4
Review "Powering ON and OFF" procedure in this
manual
5
Auger damaged or
b
locke
d
5
Check auger for damage, blockage or frozen
condition, repair as require
d
6
Faulty switch, wiring
or moto
r
6
Call customer service or contact service center
Turns on,
but won't
blow
snow
1
Auger damaged or
b
locke
d
1
Check auger for damage, blockage or froze
n
condition, repair as required
2
Chute blocked o
r
damaged
2
Check chute for damage or blockage, repair as
require
d
3
Drive belt damage
d
or loose
3
Check drive belt condition, repair as required (drive
b
elt is located on left side behind cover
)
Turns on,
but won't
run at full
speed
1 Extension cord faulty
1
Connect a known good extension cord
2
Improper extension
cord
2
Check extension cord length and gauge for use in proper
application, Review "Extension Cord Chart" in this
manual
3
Auger damaged or
b
locke
d
3
Check auger for damage, blockage or froze
n
condition, repair as required
4
Drive belt damaged
or loose
4
Check drive belt condition, repair as required (drive
belt is located on left side behind cover)
5
Faulty wiring or motor
5
Call customer service or contact service center
Loading ...
Loading ...
Loading ...