Loading ...
Loading ...
Loading ...
48 en | Configuration FLEXIDOME micro 3100i
2023-11 | V01 | F.01U.408.367
User manual
Bosch Security Systems B.V.
Consult with your network administrator for assistance configuring the Video, Control, and
the Alarm video settings, and to select the appropriate Post-alarm time.
Post-alarm time has a time period from 0 s [seconds] to 3 h [hours]; 15 s [seconds] is the
default option.
Click Set to apply the changes.
Some changes only take effect after the unit is rebooted. In this case, the Set button
changes to Set and Reboot.
5.7.5 Multicast
The device can enable multiple receivers to receive the video signal simultaneously. The
stream is either duplicated and then distributed to multiple receivers (Multi-unicast), or it is
sent as a single stream to the network, where it is simultaneously distributed to multiple
receivers in a defined group (Multicast).
Multicast operation requires a multicast-enabled network that uses UDP and the Internet
Group Management protocol (IGMPV2). The network must support group IP addresses.
Other group management protocols are not supported. The TCP protocol does not support
multicast connections.
A special IP address from 225.0.0.0 to 239.255.255.255 (classD address) must be
configured for multicast operation in a multicast-enabled network. The multicast address
can be the same for multiple streams, however, it is necessary to use a different port in
each case.
The settings must be made individually for each stream. Enter a dedicated multicast address
and port for each stream.
The video channels can be individually selected for each stream.
Enable
Enable simultaneous data reception on receivers that need to activate the multicast
function. To do this, check the box and enter the multicast address.
Multicast Address
Enter a valid multicast address to be operated in multicast mode (duplication of the data
stream in the network).
With a 0.0.0.0 setting, the encoder for the stream operates in multi-unicast mode (copying
of data stream in device). The camera supports multi-unicast connections for up to five
simultaneously connected receivers.
Duplication of data places a heavy demand on the CPU and can lead to impairment of the
image quality under certain circumstances.
Port
Enter the port address for the stream here.
Streaming
Click the checkbox to activate multicast streaming mode. An activated stream is marked
with a check. (Streaming is typically not required for standard multicast operation.)
Loading ...
Loading ...
Loading ...