Loading ...
Loading ...
Loading ...
FLEXIDOME micro 3100i Configuration | en 21
Bosch Security Systems B.V.
User manual
2023-11 | V01 | F.01U.408.367
Show VCA metadata
When video content analysis (VCA) is activated, additional information is displayed in the
live video stream. With the MOTION+ analysis type, for example, the sensor fields in which
motion is recorded are marked with yellow rectangles.
Using video analytics the outlines of detected objects are displayed in following colors:
– Red: Objects that generate an alarm event under the current settings appear on the
camera image inside a red outline.
– Orange: An object that has triggered one alarm event but does not generate another
appears inside an orange outline (example: object has crossed a line). During forensic
search, an object that triggers an alarm event has an orange outline from the beginning.
– Yellow: Objects that are detected as moving but do not generate an alarm event under
the current settings appear inside a yellow outline.
Show VCA trajectories
When this option is activated, the trajectories (motion lines of objects) from the video
content analysis are displayed in the live video image if a corresponding analysis type is
activated. The trajectory is shown as a green line following the object base point.
Show overlay icons
Select this check box to show overlay icons on the live video image.
Show 'Dashboard'
Select this checkbox to enable the Dashboard in the application bar.
Secure cookies
Select this checkbox to secure the cookies sent through the camera.
i
Notice!
If cookies are secured, authentication forwarding to MPEG ActiveX and the Video Security
App is prohibited.
HTTP referrer check
Click this option to disable HTTP referrer checking. This option is enabled by default.
The HTTP referrer check works as a protection against a CSRF (Cross-site request forgery)
attack.
If a use case requires not sending the HTTP referrer, you can disable this option. In this
situation, you might require other mitigations against CSRF attacks.
Video player
Select the type of player to be used for live mode viewing.
Video buffer
The value shown is calculated from the Latency mode setting. It cannot be changed.
JPEG resolution
Specify the size of the JPEG image on the Live page from the dropdown list.
Resource based is activated by default.
Note: Resource based will apply the best resolution possible based on the available
resources.
JPEG interval
You can specify the interval at which the individual images should be generated for the M-
JPEG image on the Live page.
Enter a time interval (in milliseconds). The default is 0.
Loading ...
Loading ...
Loading ...