Loading ...
Loading ...
Loading ...
Page 22
Turning the speakers off
– Turning the Master Speaker off will turn off all the speakers.
– Turning a Slave Speaker off first will only turn that speaker off and the other Slave Speakers will continue to play. The Master Speaker
will play as a single speaker if no other Slave Speakers are connected.
Turning the speakers back on
– Turn all the speakers on and repeat the pairing process - S
ee page 20 for instructions.
– Turn one speaker on and the speaker can be paired and connected with another device. The speaker will play as a single speaker.
Disconnecting the speakers from each other
– To disconnect a single Slave Speaker, press and release the Bluetooth Button on the speaker. All other Slave Speakers will stay
connected to the Master Speaker.
– To disconnect all the speakers, turn off the Master Speaker or press and release the Bluetooth Button on the Master Speaker. The
speakers will all be disconnected from the Master Speaker.
– If the Slave Speaker(s) are not turned off and are disconnected by pressing and releasing the Bluetooth Button on the Master
Speaker. The speakers will automatically reconnected when the Master Speaker when Bluetooth Button on the Master Speaker is
pressed and released again. If a Slave Speaker is turned off the Bluetooth Button on the speaker will need to be pressed and
released to enter Surround Mode.
Note: To pair a Slave Speaker with a flashing Orange Light with another device, press and release the Bluetooth Button . The
Bluetooth
Light will begin flashing Blue and the OontZ Angle 3 ULTRA is ready to pair and connect with the device.
Surround Mode - Important Notes
Loading ...
Loading ...
Loading ...