Loading ...
Loading ...
Loading ...
– Turn on one of OontZ Angle 3 ULTRA speakers.
– Connect the speaker to your device or connect a 3.5mm audio cable to the Aux In of the speaker. When connected the Bluetooth Light
will be lit Solid Blue or Solid Green if using Aux In. This speaker will serve as the Master Speaker.
– Turn on the other OontZ Angle 3 ULTRA speakers. These speakers will be the Slave Speakers.
– The Slave Speakers must not be connected to any device, their Bluetooth Light must be flashing. If a speaker has a solid Blue Light it
is connected to a device and you need to disconnect it by pressing and holding down the Bluetooth Button for 3 seconds until the
Bluetooth Light begins flashing.
– On the Master Speaker (speaker with solid Blue or Green Light) press and release the Bluetooth Button . The light above the
Play/Pause Button will turn solid Orange and the speaker will say “Surround Mode Transmit”.
– On the Slave Speakers with a flashing Blue Light, press and release the Bluetooth Button . The light above the Play/Pause Button
will flash Orange and the speaker will say “Surround Mode Receive”.
– After a few seconds each speaker will connect with the Master Speaker and will have the light above the Play/Pause Button lit with a
solid Orange light.
Page 20
Connecting 2, 3 or 4 OontZ Angle 3 ULTRA speakers together
You can also us the OontZ app to connect the OontZ Angle 3 ULTRA speakers together - See page 29 for instructions on using the OontZ app
Loading ...
Loading ...
Loading ...