Loading ...
Loading ...
Loading ...
Using a Match to Determine if there is Gas Flow to
the Burners
Matchstick holder is available on select models only.
1) Open the protective hard cover.
2) Check that the burner control knob is in the
o
position. Check by pushing in and turning knobs
clockwise.
Note: It is important that all burner control knobs are in the
o position before turning on the LP tank. If they are not,
the flow limiting device built into the regulator will activate,
limiting the flow of gas from the LP tank.
3) Push LP cylinder into regulator and turn clockwise until
tight.
4) Strike a match and put the flame through the slot on the
side of the griddle (A).
5) While holding lit match, push the burner control knob in
and turn it counterclockwise to the start/high
position.
6) Check that the burner is lit by looking through the slot on
the sides of the griddle.
7) If the burner does not ignite within 5 seconds, turn
burner control knob to the o
position and wait five
minutes to allow the gas to clear before attempting to
light the burner again.
TROUBLESHOOTING
A
CALL CUSTOMER
SERVICE
If you are still experiencing any
problems, contact the CustomerService
Representative in your area using the
contact information on weber.com.
REPLACEMENT PARTS
To obtain replacement parts,
contact the local retailer
in your area or log onto weber.com.
GRILL WILL NOT IGNITE
SYMPTOM
• Burner does not ignite when following the ignition instructions in the “Operation” section of this Owner's Manual.
CAUSE SOLUTION
There is a problem with gas flow. If the grill will not ignite, the first step is to determine if there is gas flowing to the burners. Tocheck this, follow the
instructions below for “Using a Match to Determine if there is Gas Flow to the Burners.”
If match lighting IS NOT successful, follow the instructions for disconnecting and reconnecting the LP tank.
There is a problem with the ignition system. If the grill will not ignite, the first step is to determine if there is gas flowing to the burners. Tocheck this, followthe instructions
below for “Using a Match to Determine if there is Gas Flow to the Burners.”
If match lighting IS successful, check the condition of the wire connections of the IgnitionSystem.
U.S.:
1-800-446-1071
Mexico:
01 800 0093237
Canada:
1-800-446-1071
PROBLEMS? QUESTIONS? Do Not Return Product to the Store. We Can Help.
If you have questions about the assembly, use, or maintenance of your grill or need replacement parts, please contact Weber
Customer Service. The serial number and model number can be
found on the cover of your owner’s manual and will be necessary for all service calls.
© 2023 Designed and engineered by Weber-Stephen Products LLC, 1415 S. Roselle Road, Palatine, Illinois 60067 USA.