Shark WD110UK WD110UK Instruction Booklet

Loading ...

USING YOUR 3-IN-1 CLEANER

POWER

HARD FLOOR MODE FRESHEN MODE MODE

MAINTAINING YOUR 3-IN-1 CLEANER

RECOMMENDED AFTER EVERY USE

1. Place the unit on the Storage Dock. The Self-

Clean mode icon located on the top of the main

body will pulse.

2. Empty the Dirty Water Tank and make sure the

clean solution tank is at least half full.

3. Press the Power Button to start the self-clean

cycle. The icon will illuminate for the full 2-minute

duration of the cycle.

4. DO NOT remove the unit from the tray during the

self-cleaning cycle. The icon will turn o when the

cycle is complete.

5. Empty the dirty water tank.

Press and release the Power button on the handle

to turn on power. To turn o power, press the

button again.

Use Hard Floor mode for powerful cleaning on bare

ﬂoors. To activate Hard Floor mode, turn on the unit

and tilt the handle back.

To clean area rugs, press the Freshen Mode icon on

top of the handle. The Freshen Mode light on the

main body will illuminate. To turn o Freshen Mode

mode, press the button again.

CONTROLS SELF-CLEANING MODE

CLEANING MODES

NOTE: Make sure the clean solution tank is at least half full and that the dirty water tank is empty before running the self-

cleaning cycle.

NOTE: To prevent leakage, DO NOT place the main body on the ﬂoor. The nozzle should always be kept ﬂat on the ﬂoor.

NOTE: If you encounter a dicult stain, use Freshen Mode for improved stain cleaning.

NOTE: If you encounter a stubborn odor on your ﬂoor or area rug, continue to clean in Freshen Mode until the odor is gone.

NOTE: If your ﬂoors are cloudy, streaky, or spotty after cleaning, it may be due to accumulated soap or grease residue. The

ﬂoor may require several cleanings with the Hydrovac.

See Troubleshooting for more information on

Self-Clean information.

sharkclean.co.uksharkclean.co.uk

Loading ...

Shark WD110UK HydroVac Corded Hard Floor Cleaner