Loading ...
Loading ...
Loading ...
50
Cleaning and maintenance
4.1 Descaling (Fig. E)
Whenever the icon appears steadily
lit on the display, it is highly recommended
that you descale the boiler.
Whenever the flashing icon appears
on the display, it means that the boiler has
to be descaled and that it is not possible
to select cooking cycles that use steam until
this step has been completed.
The frequency with which
descaling is requested varies
according to the water
hardness that has been set (see
“3.3 Settings Menu”).
If considered appropriate, it
is always possible to run the
descaling cycle in advance.
Caution
Scale build-up due to lack of
descaling can compromise
the correct operation of the
appliance in the long term.
1) To access the descaling function, enter
the settings Menu (see “3.3 Settings
Menu”).
2) Turn the left knob until the display shows
dESC
.
3) Turn the right knob to enable the function
(On) and confirm using the SET button to
start the descaling cycle.
4) To cancel the descaling cycle, press
the START/STOP button for at least 3
seconds.
Caution
Once the descaling cycle has
been started, it can only be
stopped before the container
filling cycle with descaler
solution ends (see following
paragraph St2). Afterwards, the
appliance will not allow you to
run any other function until the
descaling process has finished.
The entire duration of the cycle is
approximately 40 minutes.
The user should remain next
to the appliance for the entire
duration of the descaling cycle,
as user interventions may be
required, such as topping-up the
reservoir.
The cycle consists of 6 steps,
indicated by the progressive
emptying of the progress bar
(24) and by the indicators on the
display St1, St2, ... .
Loading ...
Loading ...
Loading ...