Hikvision DS-K1T805MX User Manual

Loading ...

Set the door open duraon when rst person is in. Aer the rst person is authorized, it allows

mulple persons access the door or other authencaon acons.

Door Open Timeout Alarm

An alarm will be triggered if the door has not been closed within the congured me duraon.

Door Contact

You can set the door contact as Remain Open or Remain Closed according to your actual needs.

By default, it is Remain Closed.

Extended Open Duraon

The door contact can be enabled with appropriate delay aer person with extended access

needs swipes her/his card.

Duress Code

The door can open by inpung the duress code when there is duress. At the same me, the

client can report the duress event.

Super Password

The specic person can open the door by inpung the super password.

Unlock Password

The specic person can open the door by inpung the unlock password.

Note

The duress code and the super code should be dierent. And the digit ranges from 4 to 8.

Terminal Parameters

You can set terminal parameters for accessing.

Tap → Access Control → Terminal Parameters .

You can set Working Mode as Access Control Mode. The access control mode is the device normal

mode. You should authencate your credenal for accessing.

Tap Save to save the sengs aer the conguraon.

Set Card Security

Tap → Access Control → Card Security to enter the conguraon page.

Set the parameters and tap Save.

Enable NFC Card

In order to prevent the mobile phone from geng the data of the access control, you can

enable NFC card to increase the security level of the data.

Enable M1 Card

Access Control Terminal User Manual

Loading ...

Hikvision DS-K1T805MX Access Control Terminal