Loading ...
Loading ...
Loading ...
EN - 16
2
1
4-Wire Power Cord Installation
WARNING: The neutral wire of the
supply circuit
is connected to the neutral terminal
located in the center of the
connector block. The power leads must be
connected to the outside
(brass-colored) terminals. The 4th
grounding lead must be connected to the
frame of the range with the grounding plate
and grounding screw.
a) Remove the 3 screws from the connector
block.
b) Remove the grounding screw and strap
from the connector block middle location
and the screw connection to the frame of
the range.
c) Insert screws through each power cord
terminal ring and into connector block until
screw engages nut. Be certain that the
center wire is connected to the center screw
of the connector block. Tighten screws
securely.
d) Attach ground wire to the frame of the
range.
CAUTION: The product label is on the
front of the oven
2.2
ANTI-TILTING
KIT
The document bag contains an anti-tilting
kit. Loosely attach the anti-tilting bracket (1)
to the ground using the screw (2) and wall
plug (3) as shown in the figure below. Push
the appliance towards the bracket making
sure that the anti-tilting bracket is inserted
into the foot on the appliance.
Connector block
Neutral terminal
Ground strap
Power cord
Before
Neutral terminal
After
Ground Strap
(grounding
to range)
Neutral terminal
Grounding
plate
Grounding to range
Loading ...
Loading ...
Loading ...