Loading ...
Loading ...
Loading ...
www.fhiaba.com · www.thevettagroup.com · Info Line 1-855-4-FHIABA (1-855-434-4222)
23
3. PREPARING FOR THE INSTALLATION
EN
The appliances are delivered from the factory for
operation at 110 V to 120V AC - 60 Hz (US and Canada).
They are provided with a suitable supply cable and
plug to be connected to an appropriate 15 A socket to
provide eective grounding.
A dedicated 15-A circuit breaker should also be
installed and should be easily accessible, so that it
can be easily switched o before any installation or
maintenance is performed.
A 1/4” water line with an accessible shut-o valve
must be supplied in order to connect to the water
supply system (for appliances equipped with ice
makers).
The appliance is provided with a water-adapter
elbow which is suitable for the recommended water
pressure and complies with the applicable food and
water regulations.
The water filter cartridge that is provided with
the appliance should be installed according to the
accompanying instructions. Please refer to the water
filter installation instructions contained in the water
filter kit. The solenoid connection on the appliance
has a 3/4” diameter but metric threading (NPT).
A standard threaded garden-hose connector such
as a braided stainless-steel hose typically found at
hardware stores will strip or damage the solenoid
threads. We recommend using only the supplied
1/4” quick-connect elbow adapter for connecting a
1/4” copper or polyethylene source water line to the
appliance.
Do not use extension cords and/or
multiple adapters for the power supply
connection.
ELECTRICAL AND WATER SUPPLY
BEHIND THE UNIT
BOTTOM COMPRESSOR
UNIT
TOP COMPRESSOR
UNIT
3.3 Energy: Alternatives and Home
Automation
If energy is supplied through an alternative
energy power source (solar, geothermal, etc.),
or if home automation systems are installed
with carrier signals in the power lines, it may
be necessary to install an isolation transformer
(not supplied) to prevent interference with the
appliance’s electronics.
Proceed as follows:
> Unwind the electric cable, and connect it directly to
the wall socket.
> Make sure the appliance is in Stand-by mode and
that all lights are o; if not, press the Unit button
to switch it o.
> Connect the water cable behind the appliance [ 1 ].
fig.1 Back of appliance
Water connection
Electrical connection
BOTTOM COMPRESSOR UNITS
1
E
W
E
W
Loading ...
Loading ...
Loading ...