SKU:DPWS-IN001-US
5" PROJECTION ALARM
CLOCK WITH FM RADIO
Manual
FEATURES IDENTIFYING PARTS
MANUAL SETTING
FM RADIO
NOTE
LED screen display
Two alarms
Buzzer or FM radio as the alarm
Automatic snooze function (OFF or 5~60min)
FM radio
FM frequency range: 87.5MHz ~ 108.0MHz
Searching radio frequency automatically or manually
LED backlight brightness settings: 3 levels or OFF
Adjustable time projection
Projection brightness settings: 2 levels or OFF
Power supply:
USB power cable: DC5V (Input current is more than 500mA)
Battery (for saving settings only): 1*3.0V CR2032
Please plug in the clock using the USB power cable to turn it
on (the clock will not operate on the CR2032 battery.)
Note: please plug in the clock using the included USB cable to
get it operate.
Press and hold the “SET” button for 3 seconds to enter the
setting mode.
If you need to turn off the radio, press the “ ” button to turn
it off.
Press the “VOL” button to set the volume when FM radio is on.
Press “▲” or “▼” button to adjust the volume from L00 to L15.
When the radio is turned on for the first time, the clock will
automatically search for frequencies from “FM87.5”. Then, it
will stop at a receivable broadcast station and preset it as
C:01. The automatic searching and presetting will go on until
the frequency is "FM108.0". Now, the clock will stop at the
preset C:01 station to play.
You can press “SET” to browse the preset stations. If the clock
stops at “C:01”, press the “SET” button once to switch to the
next frequency “C:02”.
Press the “▲” or “▼” buttons to select the previous or next
frequency. You can also press and hold the “▲” or “▼” buttons
to speed up searching.
Press and hold the “SET” button to save a receivable station.
Preset station numbers start to flash (such as C:01). Next,
press “▲” or “▼” to select a station number to save the station
and press the “SET” button to confirm your setting.
Press and hold the “▲” and “▼” buttons for more than 3
seconds to automatically search for broadcast stations.
Use the button “▲” or “▼” to set the correct hour. Then, press
the “SET” button to confirm your setting and move on.
Use the button “▲” or “▼” button to set the correct minute.
Then, press the “SET” button to confirm your setting and move
on.
When “24Hr” starts to flash, use the button “▲” or “▼” button
to select 24 Hr mode or 12 Hr mode. Press the “SET” button to
confirm your setting and to exit settings.
In normal time mode, press the “RADIO/SLEEP” button once
to turn on the radio.
1.
Insert a 3.0V CR2032 battery and make sure it is installed
correctly [ “+” and “-” marks].
2.
To save time settings, please insert a CR2032 battery.
Otherwise, the clock will reset and lose all memory including
the time settings, FM radio settings when the power is cut off
suddenly.
3.
Part A - Clock
A1: Time
A2: ALARM1 icon “ ”
A3: ALARM2 icon “ ”
A4: SNOOZE icon “ ”
A5: RADIO icon “ ”
A6: SLEEP icon “ ”
Part B – Buttons and switches
1
2
FM
B1: Buttons
B2: LED screen
B3: Projection
B4: Speaker
B5: Battery compartment
B6: Power supply socket
SKU:DPWS-IN001-US
5" PROJECTION ALARM
CLOCK WITH FM RADIO
Manual
FEATURES IDENTIFYING PARTS
MANUAL SETTING
FM RADIO
NOTE
LED screen display
Two alarms
Buzzer or FM radio as the alarm
Automatic snooze function (OFF or 5~60min)
FM radio
FM frequency range: 87.5MHz ~ 108.0MHz
Searching radio frequency automatically or manually
LED backlight brightness settings: 3 levels or OFF
Adjustable time projection
Projection brightness settings: 2 levels or OFF
Power supply:
USB power cable: DC5V (Input current is more than 500mA)
Battery (for saving settings only): 1*3.0V CR2032
Please plug in the clock using the USB power cable to turn it
on (the clock will not operate on the CR2032 battery.)
Note: please plug in the clock using the included USB cable to
get it operate.
Press and hold the “SET” button for 3 seconds to enter the
setting mode.
If you need to turn off the radio, press the “ ” button to turn
it off.
Press the “VOL” button to set the volume when FM radio is on.
Press “▲” or “▼” button to adjust the volume from L00 to L15.
When the radio is turned on for the first time, the clock will
automatically search for frequencies from “FM87.5”. Then, it
will stop at a receivable broadcast station and preset it as
C:01. The automatic searching and presetting will go on until
the frequency is "FM108.0". Now, the clock will stop at the
preset C:01 station to play.
You can press “SET” to browse the preset stations. If the clock
stops at “C:01”, press the “SET” button once to switch to the
next frequency “C:02”.
Press the “▲” or “▼” buttons to select the previous or next
frequency. You can also press and hold the “▲” or “▼” buttons
to speed up searching.
Press and hold the “SET” button to save a receivable station.
Preset station numbers start to flash (such as C:01). Next,
press “▲” or “▼” to select a station number to save the station
and press the “SET” button to confirm your setting.
Press and hold the “▲” and “▼” buttons for more than 3
seconds to automatically search for broadcast stations.
Use the button “▲” or “▼” to set the correct hour. Then, press
the “SET” button to confirm your setting and move on.
Use the button “▲” or “▼” button to set the correct minute.
Then, press the “SET” button to confirm your setting and move
on.
When “24Hr” starts to flash, use the button “▲” or “▼” button
to select 24 Hr mode or 12 Hr mode. Press the “SET” button to
confirm your setting and to exit settings.
In normal time mode, press the “RADIO/SLEEP” button once
to turn on the radio.
1.
Insert a 3.0V CR2032 battery and make sure it is installed
correctly [ “+” and “-” marks].
2.
To save time settings, please insert a CR2032 battery.
Otherwise, the clock will reset and lose all memory including
the time settings, FM radio settings when the power is cut off
suddenly.
3.
Part A - Clock
A1: Time
A2: ALARM1 icon “ ”
A3: ALARM2 icon “ ”
A4: SNOOZE icon “ ”
A5: RADIO icon “ ”
A6: SLEEP icon “ ”
Part B – Buttons and switches
1
2
FM
B1: Buttons
B2: LED screen
B3: Projection
B4: Speaker
B5: Battery compartment
B6: Power supply socket
SKU:DPWS-IN001-US
5" PROJECTION ALARM
CLOCK WITH FM RADIO
Manual
FEATURES IDENTIFYING PARTS
MANUAL SETTING
FM RADIO
NOTE
LED screen display
Two alarms
Buzzer or FM radio as the alarm
Automatic snooze function (OFF or 5~60min)
FM radio
FM frequency range: 87.5MHz ~ 108.0MHz
Searching radio frequency automatically or manually
LED backlight brightness settings: 3 levels or OFF
Adjustable time projection
Projection brightness settings: 2 levels or OFF
Power supply:
USB power cable: DC5V (Input current is more than 500mA)
Battery (for saving settings only): 1*3.0V CR2032
Please plug in the clock using the USB power cable to turn it
on (the clock will not operate on the CR2032 battery.)
Note: please plug in the clock using the included USB cable to
get it operate.
Press and hold the “SET” button for 3 seconds to enter the
setting mode.
If you need to turn off the radio, press the “ ” button to turn
it off.
Press the “VOL” button to set the volume when FM radio is on.
Press “▲” or “▼” button to adjust the volume from L00 to L15.
When the radio is turned on for the first time, the clock will
automatically search for frequencies from “FM87.5”. Then, it
will stop at a receivable broadcast station and preset it as
C:01. The automatic searching and presetting will go on until
the frequency is "FM108.0". Now, the clock will stop at the
preset C:01 station to play.
You can press “SET” to browse the preset stations. If the clock
stops at “C:01”, press the “SET” button once to switch to the
next frequency “C:02”.
Press the “▲” or “▼” buttons to select the previous or next
frequency. You can also press and hold the “▲” or “▼” buttons
to speed up searching.
Press and hold the “SET” button to save a receivable station.
Preset station numbers start to flash (such as C:01). Next,
press “▲” or “▼” to select a station number to save the station
and press the “SET” button to confirm your setting.
Press and hold the “▲” and “▼” buttons for more than 3
seconds to automatically search for broadcast stations.
Use the button “▲” or “▼” to set the correct hour. Then, press
the “SET” button to confirm your setting and move on.
Use the button “▲” or “▼” button to set the correct minute.
Then, press the “SET” button to confirm your setting and move
on.
When “24Hr” starts to flash, use the button “▲” or “▼” button
to select 24 Hr mode or 12 Hr mode. Press the “SET” button to
confirm your setting and to exit settings.
In normal time mode, press the “RADIO/SLEEP” button once
to turn on the radio.
1.
Insert a 3.0V CR2032 battery and make sure it is installed
correctly [ “+” and “-” marks].
2.
To save time settings, please insert a CR2032 battery.
Otherwise, the clock will reset and lose all memory including
the time settings, FM radio settings when the power is cut off
suddenly.
3.
Part A - Clock
A1: Time
A2: ALARM1 icon “ ”
A3: ALARM2 icon “ ”
A4: SNOOZE icon “ ”
A5: RADIO icon “ ”
A6: SLEEP icon “ ”
Part B – Buttons and switches
1
2
FM
B1: Buttons
B2: LED screen
B3: Projection
B4: Speaker
B5: Battery compartment
B6: Power supply socket
SKU:DPWS-IN001-US
5" PROJECTION ALARM
CLOCK WITH FM RADIO
Manual
FEATURES IDENTIFYING PARTS
MANUAL SETTING
FM RADIO
NOTE
LED screen display
Two alarms
Buzzer or FM radio as the alarm
Automatic snooze function (OFF or 5~60min)
FM radio
FM frequency range: 87.5MHz ~ 108.0MHz
Searching radio frequency automatically or manually
LED backlight brightness settings: 3 levels or OFF
Adjustable time projection
Projection brightness settings: 2 levels or OFF
Power supply:
USB power cable: DC5V (Input current is more than 500mA)
Battery (for saving settings only): 1*3.0V CR2032
Please plug in the clock using the USB power cable to turn it
on (the clock will not operate on the CR2032 battery.)
Note: please plug in the clock using the included USB cable to
get it operate.
Press and hold the “SET” button for 3 seconds to enter the
setting mode.
If you need to turn off the radio, press the “ ” button to turn
it off.
Press the “VOL” button to set the volume when FM radio is on.
Press “▲” or “▼” button to adjust the volume from L00 to L15.
When the radio is turned on for the first time, the clock will
automatically search for frequencies from “FM87.5”. Then, it
will stop at a receivable broadcast station and preset it as
C:01. The automatic searching and presetting will go on until
the frequency is "FM108.0". Now, the clock will stop at the
preset C:01 station to play.
You can press “SET” to browse the preset stations. If the clock
stops at “C:01”, press the “SET” button once to switch to the
next frequency “C:02”.
Press the “▲” or “▼” buttons to select the previous or next
frequency. You can also press and hold the “▲” or “▼” buttons
to speed up searching.
Press and hold the “SET” button to save a receivable station.
Preset station numbers start to flash (such as C:01). Next,
press “▲” or “▼” to select a station number to save the station
and press the “SET” button to confirm your setting.
Press and hold the “▲” and “▼” buttons for more than 3
seconds to automatically search for broadcast stations.
Use the button “▲” or “▼” to set the correct hour. Then, press
the “SET” button to confirm your setting and move on.
Use the button “▲” or “▼” button to set the correct minute.
Then, press the “SET” button to confirm your setting and move
on.
When “24Hr” starts to flash, use the button “▲” or “▼” button
to select 24 Hr mode or 12 Hr mode. Press the “SET” button to
confirm your setting and to exit settings.
In normal time mode, press the “RADIO/SLEEP” button once
to turn on the radio.
1.
Insert a 3.0V CR2032 battery and make sure it is installed
correctly [ “+” and “-” marks].
2.
To save time settings, please insert a CR2032 battery.
Otherwise, the clock will reset and lose all memory including
the time settings, FM radio settings when the power is cut off
suddenly.
3.
Part A - Clock
A1: Time
A2: ALARM1 icon “ ”
A3: ALARM2 icon “ ”
A4: SNOOZE icon “ ”
A5: RADIO icon “ ”
A6: SLEEP icon “ ”
Part B – Buttons and switches
1
2
FM
B1: Buttons
B2: LED screen
B3: Projection
B4: Speaker
B5: Battery compartment
B6: Power supply socket
SKU:DPWS-IN001-US
5" PROJECTION ALARM
CLOCK WITH FM RADIO
Manual
FEATURES IDENTIFYING PARTS
MANUAL SETTING
FM RADIO
NOTE
LED screen display
Two alarms
Buzzer or FM radio as the alarm
Automatic snooze function (OFF or 5~60min)
FM radio
FM frequency range: 87.5MHz ~ 108.0MHz
Searching radio frequency automatically or manually
LED backlight brightness settings: 3 levels or OFF
Adjustable time projection
Projection brightness settings: 2 levels or OFF
Power supply:
USB power cable: DC5V (Input current is more than 500mA)
Battery (for saving settings only): 1*3.0V CR2032
Please plug in the clock using the USB power cable to turn it
on (the clock will not operate on the CR2032 battery.)
Note: please plug in the clock using the included USB cable to
get it operate.
Press and hold the “SET” button for 3 seconds to enter the
setting mode.
If you need to turn off the radio, press the “ ” button to turn
it off.
Press the “VOL” button to set the volume when FM radio is on.
Press “▲” or “▼” button to adjust the volume from L00 to L15.
When the radio is turned on for the first time, the clock will
automatically search for frequencies from “FM87.5”. Then, it
will stop at a receivable broadcast station and preset it as
C:01. The automatic searching and presetting will go on until
the frequency is "FM108.0". Now, the clock will stop at the
preset C:01 station to play.
You can press “SET” to browse the preset stations. If the clock
stops at “C:01”, press the “SET” button once to switch to the
next frequency “C:02”.
Press the “▲” or “▼” buttons to select the previous or next
frequency. You can also press and hold the “▲” or “▼” buttons
to speed up searching.
Press and hold the “SET” button to save a receivable station.
Preset station numbers start to flash (such as C:01). Next,
press “▲” or “▼” to select a station number to save the station
and press the “SET” button to confirm your setting.
Press and hold the “▲” and “▼” buttons for more than 3
seconds to automatically search for broadcast stations.
Use the button “▲” or “▼” to set the correct hour. Then, press
the “SET” button to confirm your setting and move on.
Use the button “▲” or “▼” button to set the correct minute.
Then, press the “SET” button to confirm your setting and move
on.
When “24Hr” starts to flash, use the button “▲” or “▼” button
to select 24 Hr mode or 12 Hr mode. Press the “SET” button to
confirm your setting and to exit settings.
In normal time mode, press the “RADIO/SLEEP” button once
to turn on the radio.
1.
Insert a 3.0V CR2032 battery and make sure it is installed
correctly [ “+” and “-” marks].
2.
To save time settings, please insert a CR2032 battery.
Otherwise, the clock will reset and lose all memory including
the time settings, FM radio settings when the power is cut off
suddenly.
3.
Part A - Clock
A1: Time
A2: ALARM1 icon “ ”
A3: ALARM2 icon “ ”
A4: SNOOZE icon “ ”
A5: RADIO icon “ ”
A6: SLEEP icon “ ”
Part B – Buttons and switches
1
2
FM
B1: Buttons
B2: LED screen
B3: Projection
B4: Speaker
B5: Battery compartment
B6: Power supply socket
SETTING ALARMS
ACTIVATE OR DEACTIVATE ALARMS
TURN OFF ALARM RING PROJECTION FUNCTION WARRANTY
CUSTOMER SUPPORT
SNOOZE FUNCTION
Note: if the radio is on, the screen will stay on as well. When the
radio is off, the screen will turn off accordingly.
Note:
Dr.Prepare products are covered by a 12-month limited
warranty from the original purchase date. If any problems
occur, please contact our support team.
We only provide after-sales services for products that are sold
by Dr.Prepare or retailers and distributors authorized by
Dr.Prepare. If you have purchased your unit from other
channels, please contact your seller for more information
about return and warranty.
In FM mode, press the “RADIO/SLEEP” button to turn on the
timer. The sleep timer icon and “ :05 ” value will show up.
It means that FM radio will automatically turn off in 5 minutes.
You can press the “RADIO/SLEEP” button to choose the
desired timer (05 min,10 min, 15 min, 30 min, 45 min, 60min,
75 min, 90 min, and OFF).
If you choose “OFF” , it means that you will wake up to a
standard buzzer sound instead when the Alarm 1 is triggered.
Then, press the “AL1-2” button to confirm your setting.
When snooze icon starts flashing and “:05” will show up.
Use the “▲” or “▼” button to set the snooze time from 05
minutes to 60 minutes or OFF. Press the “AL1-2” button to
confirm your setting and start setting Alarm 2 .
The setting of Alarm 2 is the same as Alarm 1 . When you
finish the setting, the clock exits the alarm setting mode and
goes back to the time display.
There are two kinds of alarms: the standard buzzer sound and
the FM radio.
If you choose to wake up to the standard buzzer sound, the
clock will make “Bi” sound for 1 minute and icon “ ” or “ ”
keeps flashing. Press any button except the “ ” button to
stop alarm from ringing. The icon “ ” or “ ” will automatically
stop flashing as well.
When the alarm is ringing, press the “ ” button to enter the
SNOOZE mode. The alarm goes off again as the snooze timer
expires.
if you have disenabled the snooze function in the setting, there
will be no snooze timer. Press the the “ ” button and the
alarm stops instantly (and will not go off until the next day).
If you choose to wake up to the FM radio, the clock will
automatically turn on the radio for 30 minutes and icon “ ” or
“ ” keeps flashing. You can press the “AL1-2” button to stop
alarm from ringing or press to turn off the FM radio. The
icon “ ” or “ ” automatically stops flashing as well.
Alternatively, you can switch the radio frequency, adjust the
volume, or change other FM settings.
In normal time mode, short press the “AL1-2” button:
Press x1: shows up and Alarm 1 is activated
When time is displayed on the screen (normal time mode),
press “SET” button once to turn on Alarm 1 and twice to turn
on Alarm 2 .
In normal time mode, press and hold the “AL1-2” button for 3
seconds to enter the alarm setting mode. The Hour of Alarm 1
starts to flash. Use the button “▲” or “▼” button to set the
desired hour.
Press the “AL1-2” button to confirm your setting and move on.
The Minute of Alarm 1 starts to flash. Use the button “▲” or
“▼” button to set the desired minute. Then, press the “AL1-2”
button to confirm your setting.
Now “OFF” icon starts flashing on the screen. Use the button
“▲” or “▼” button to choose whether to wake up to the FM
radio or not (ON or OFF).
If you choose “ON”, it means that the FM radio will turn on to
wake you up when the Alarm 1 is triggered. When “L08”
flashes on the screen, use the button “▲” or “▼” button to
adjust the volume for the Alarm 1. Then, press the “AL1-2”
button to confirm your setting.
In the normal time mode, short press the “▲/Project” button to
adjust brightness: Low, High, and Off.
BACKLIGHT BRIGHTNESS
Short press “ ” to adjust the brightness of the LED screen:
Low, Medium, High, and Off.
When the screen is adjust to Off, short press any button except
the “ ” button to light up screen with Low brightness for 5
seconds.
Press and hold the “▲/Project” button to rotate the projection
image for 90° each time.
The effective projection range is from 3.3 feet to 9.8 feet.
You can press and hold the “▲” or “▼” button to speed up
setting.
1.
The clock will automatically save the settings and exit the
setting mode if no button is pressed within 20 seconds.
2.
1
1
1
1
1
1
1
1
1
1
Press x2: shows up and Alarm 2 is activated
Press x3: and both show up and alarms are both activated
Press x4: Both alarms are deactivated
1
2
2
2
2
2
2
1
2
2
If you have any questions or concerns, please send us an email
SETTING ALARMS
ACTIVATE OR DEACTIVATE ALARMS
TURN OFF ALARM RING PROJECTION FUNCTION WARRANTY
CUSTOMER SUPPORT
SNOOZE FUNCTION
Note: if the radio is on, the screen will stay on as well. When the
radio is off, the screen will turn off accordingly.
Note:
Dr.Prepare products are covered by a 12-month limited
warranty from the original purchase date. If any problems
occur, please contact our support team.
We only provide after-sales services for products that are sold
by Dr.Prepare or retailers and distributors authorized by
Dr.Prepare. If you have purchased your unit from other
channels, please contact your seller for more information
about return and warranty.
In FM mode, press the “RADIO/SLEEP” button to turn on the
timer. The sleep timer icon and “ :05 ” value will show up.
It means that FM radio will automatically turn off in 5 minutes.
You can press the “RADIO/SLEEP” button to choose the
desired timer (05 min,10 min, 15 min, 30 min, 45 min, 60min,
75 min, 90 min, and OFF).
If you choose “OFF” , it means that you will wake up to a
standard buzzer sound instead when the Alarm 1 is triggered.
Then, press the “AL1-2” button to confirm your setting.
When snooze icon starts flashing and “:05” will show up.
Use the “▲” or “▼” button to set the snooze time from 05
minutes to 60 minutes or OFF. Press the “AL1-2” button to
confirm your setting and start setting Alarm 2 .
The setting of Alarm 2 is the same as Alarm 1 . When you
finish the setting, the clock exits the alarm setting mode and
goes back to the time display.
There are two kinds of alarms: the standard buzzer sound and
the FM radio.
If you choose to wake up to the standard buzzer sound, the
clock will make “Bi” sound for 1 minute and icon “ ” or “ ”
keeps flashing. Press any button except the “ ” button to
stop alarm from ringing. The icon “ ” or “ ” will automatically
stop flashing as well.
When the alarm is ringing, press the “ ” button to enter the
SNOOZE mode. The alarm goes off again as the snooze timer
expires.
if you have disenabled the snooze function in the setting, there
will be no snooze timer. Press the the “ ” button and the
alarm stops instantly (and will not go off until the next day).
If you choose to wake up to the FM radio, the clock will
automatically turn on the radio for 30 minutes and icon “ ” or
“ ” keeps flashing. You can press the “AL1-2” button to stop
alarm from ringing or press to turn off the FM radio. The
icon “ ” or “ ” automatically stops flashing as well.
Alternatively, you can switch the radio frequency, adjust the
volume, or change other FM settings.
In normal time mode, short press the “AL1-2” button:
Press x1: shows up and Alarm 1 is activated
When time is displayed on the screen (normal time mode),
press “SET” button once to turn on Alarm 1 and twice to turn
on Alarm 2 .
In normal time mode, press and hold the “AL1-2” button for 3
seconds to enter the alarm setting mode. The Hour of Alarm 1
starts to flash. Use the button “▲” or “▼” button to set the
desired hour.
Press the “AL1-2” button to confirm your setting and move on.
The Minute of Alarm 1 starts to flash. Use the button “▲” or
“▼” button to set the desired minute. Then, press the “AL1-2”
button to confirm your setting.
Now “OFF” icon starts flashing on the screen. Use the button
“▲” or “▼” button to choose whether to wake up to the FM
radio or not (ON or OFF).
If you choose “ON”, it means that the FM radio will turn on to
wake you up when the Alarm 1 is triggered. When “L08”
flashes on the screen, use the button “▲” or “▼” button to
adjust the volume for the Alarm 1. Then, press the “AL1-2”
button to confirm your setting.
In the normal time mode, short press the “▲/Project” button to
adjust brightness: Low, High, and Off.
BACKLIGHT BRIGHTNESS
Short press “ ” to adjust the brightness of the LED screen:
Low, Medium, High, and Off.
When the screen is adjust to Off, short press any button except
the “ ” button to light up screen with Low brightness for 5
seconds.
Press and hold the “▲/Project” button to rotate the projection
image for 90° each time.
The effective projection range is from 3.3 feet to 9.8 feet.
You can press and hold the “▲” or “▼” button to speed up
setting.
1.
The clock will automatically save the settings and exit the
setting mode if no button is pressed within 20 seconds.
2.
1
1
1
1
1
1
1
1
1
1
Press x2: shows up and Alarm 2 is activated
Press x3: and both show up and alarms are both activated
Press x4: Both alarms are deactivated
1
2
2
2
2
2
2
1
2
2
If you have any questions or concerns, please send us an email
SETTING ALARMS
ACTIVATE OR DEACTIVATE ALARMS
TURN OFF ALARM RING PROJECTION FUNCTION WARRANTY
CUSTOMER SUPPORT
SNOOZE FUNCTION
Note: if the radio is on, the screen will stay on as well. When the
radio is off, the screen will turn off accordingly.
Note:
Dr.Prepare products are covered by a 12-month limited
warranty from the original purchase date. If any problems
occur, please contact our support team.
We only provide after-sales services for products that are sold
by Dr.Prepare or retailers and distributors authorized by
Dr.Prepare. If you have purchased your unit from other
channels, please contact your seller for more information
about return and warranty.
In FM mode, press the “RADIO/SLEEP” button to turn on the
timer. The sleep timer icon and “ :05 ” value will show up.
It means that FM radio will automatically turn off in 5 minutes.
You can press the “RADIO/SLEEP” button to choose the
desired timer (05 min,10 min, 15 min, 30 min, 45 min, 60min,
75 min, 90 min, and OFF).
If you choose “OFF” , it means that you will wake up to a
standard buzzer sound instead when the Alarm 1 is triggered.
Then, press the “AL1-2” button to confirm your setting.
When snooze icon starts flashing and “:05” will show up.
Use the “▲” or “▼” button to set the snooze time from 05
minutes to 60 minutes or OFF. Press the “AL1-2” button to
confirm your setting and start setting Alarm 2 .
The setting of Alarm 2 is the same as Alarm 1 . When you
finish the setting, the clock exits the alarm setting mode and
goes back to the time display.
There are two kinds of alarms: the standard buzzer sound and
the FM radio.
If you choose to wake up to the standard buzzer sound, the
clock will make “Bi” sound for 1 minute and icon “ ” or “ ”
keeps flashing. Press any button except the “ ” button to
stop alarm from ringing. The icon “ ” or “ ” will automatically
stop flashing as well.
When the alarm is ringing, press the “ ” button to enter the
SNOOZE mode. The alarm goes off again as the snooze timer
expires.
if you have disenabled the snooze function in the setting, there
will be no snooze timer. Press the the “ ” button and the
alarm stops instantly (and will not go off until the next day).
If you choose to wake up to the FM radio, the clock will
automatically turn on the radio for 30 minutes and icon “ ” or
“ ” keeps flashing. You can press the “AL1-2” button to stop
alarm from ringing or press to turn off the FM radio. The
icon “ ” or “ ” automatically stops flashing as well.
Alternatively, you can switch the radio frequency, adjust the
volume, or change other FM settings.
In normal time mode, short press the “AL1-2” button:
Press x1: shows up and Alarm 1 is activated
When time is displayed on the screen (normal time mode),
press “SET” button once to turn on Alarm 1 and twice to turn
on Alarm 2 .
In normal time mode, press and hold the “AL1-2” button for 3
seconds to enter the alarm setting mode. The Hour of Alarm 1
starts to flash. Use the button “▲” or “▼” button to set the
desired hour.
Press the “AL1-2” button to confirm your setting and move on.
The Minute of Alarm 1 starts to flash. Use the button “▲” or
“▼” button to set the desired minute. Then, press the “AL1-2”
button to confirm your setting.
Now “OFF” icon starts flashing on the screen. Use the button
“▲” or “▼” button to choose whether to wake up to the FM
radio or not (ON or OFF).
If you choose “ON”, it means that the FM radio will turn on to
wake you up when the Alarm 1 is triggered. When “L08”
flashes on the screen, use the button “▲” or “▼” button to
adjust the volume for the Alarm 1. Then, press the “AL1-2”
button to confirm your setting.
In the normal time mode, short press the “▲/Project” button to
adjust brightness: Low, High, and Off.
BACKLIGHT BRIGHTNESS
Short press “ ” to adjust the brightness of the LED screen:
Low, Medium, High, and Off.
When the screen is adjust to Off, short press any button except
the “ ” button to light up screen with Low brightness for 5
seconds.
Press and hold the “▲/Project” button to rotate the projection
image for 90° each time.
The effective projection range is from 3.3 feet to 9.8 feet.
You can press and hold the “▲” or “▼” button to speed up
setting.
1.
The clock will automatically save the settings and exit the
setting mode if no button is pressed within 20 seconds.
2.
1
1
1
1
1
1
1
1
1
1
Press x2: shows up and Alarm 2 is activated
Press x3: and both show up and alarms are both activated
Press x4: Both alarms are deactivated
1
2
2
2
2
2
2
1
2
2
If you have any questions or concerns, please send us an email
SETTING ALARMS
ACTIVATE OR DEACTIVATE ALARMS
TURN OFF ALARM RING PROJECTION FUNCTION WARRANTY
CUSTOMER SUPPORT
SNOOZE FUNCTION
Note: if the radio is on, the screen will stay on as well. When the
radio is off, the screen will turn off accordingly.
Note:
Dr.Prepare products are covered by a 12-month limited
warranty from the original purchase date. If any problems
occur, please contact our support team.
We only provide after-sales services for products that are sold
by Dr.Prepare or retailers and distributors authorized by
Dr.Prepare. If you have purchased your unit from other
channels, please contact your seller for more information
about return and warranty.
In FM mode, press the “RADIO/SLEEP” button to turn on the
timer. The sleep timer icon and “ :05 ” value will show up.
It means that FM radio will automatically turn off in 5 minutes.
You can press the “RADIO/SLEEP” button to choose the
desired timer (05 min,10 min, 15 min, 30 min, 45 min, 60min,
75 min, 90 min, and OFF).
If you choose “OFF” , it means that you will wake up to a
standard buzzer sound instead when the Alarm 1 is triggered.
Then, press the “AL1-2” button to confirm your setting.
When snooze icon starts flashing and “:05” will show up.
Use the “▲” or “▼” button to set the snooze time from 05
minutes to 60 minutes or OFF. Press the “AL1-2” button to
confirm your setting and start setting Alarm 2 .
The setting of Alarm 2 is the same as Alarm 1 . When you
finish the setting, the clock exits the alarm setting mode and
goes back to the time display.
There are two kinds of alarms: the standard buzzer sound and
the FM radio.
If you choose to wake up to the standard buzzer sound, the
clock will make “Bi” sound for 1 minute and icon “ ” or “ ”
keeps flashing. Press any button except the “ ” button to
stop alarm from ringing. The icon “ ” or “ ” will automatically
stop flashing as well.
When the alarm is ringing, press the “ ” button to enter the
SNOOZE mode. The alarm goes off again as the snooze timer
expires.
if you have disenabled the snooze function in the setting, there
will be no snooze timer. Press the the “ ” button and the
alarm stops instantly (and will not go off until the next day).
If you choose to wake up to the FM radio, the clock will
automatically turn on the radio for 30 minutes and icon “ ” or
“ ” keeps flashing. You can press the “AL1-2” button to stop
alarm from ringing or press to turn off the FM radio. The
icon “ ” or “ ” automatically stops flashing as well.
Alternatively, you can switch the radio frequency, adjust the
volume, or change other FM settings.
In normal time mode, short press the “AL1-2” button:
Press x1: shows up and Alarm 1 is activated
When time is displayed on the screen (normal time mode),
press “SET” button once to turn on Alarm 1 and twice to turn
on Alarm 2 .
In normal time mode, press and hold the “AL1-2” button for 3
seconds to enter the alarm setting mode. The Hour of Alarm 1
starts to flash. Use the button “▲” or “▼” button to set the
desired hour.
Press the “AL1-2” button to confirm your setting and move on.
The Minute of Alarm 1 starts to flash. Use the button “▲” or
“▼” button to set the desired minute. Then, press the “AL1-2”
button to confirm your setting.
Now “OFF” icon starts flashing on the screen. Use the button
“▲” or “▼” button to choose whether to wake up to the FM
radio or not (ON or OFF).
If you choose “ON”, it means that the FM radio will turn on to
wake you up when the Alarm 1 is triggered. When “L08”
flashes on the screen, use the button “▲” or “▼” button to
adjust the volume for the Alarm 1. Then, press the “AL1-2”
button to confirm your setting.
In the normal time mode, short press the “▲/Project” button to
adjust brightness: Low, High, and Off.
BACKLIGHT BRIGHTNESS
Short press “ ” to adjust the brightness of the LED screen:
Low, Medium, High, and Off.
When the screen is adjust to Off, short press any button except
the “ ” button to light up screen with Low brightness for 5
seconds.
Press and hold the “▲/Project” button to rotate the projection
image for 90° each time.
The effective projection range is from 3.3 feet to 9.8 feet.
You can press and hold the “▲” or “▼” button to speed up
setting.
1.
The clock will automatically save the settings and exit the
setting mode if no button is pressed within 20 seconds.
2.
1
1
1
1
1
1
1
1
1
1
Press x2: shows up and Alarm 2 is activated
Press x3: and both show up and alarms are both activated
Press x4: Both alarms are deactivated
1
2
2
2
2
2
2
1
2
2
If you have any questions or concerns, please send us an email
SETTING ALARMS
ACTIVATE OR DEACTIVATE ALARMS
TURN OFF ALARM RING PROJECTION FUNCTION WARRANTY
CUSTOMER SUPPORT
SNOOZE FUNCTION
Note: if the radio is on, the screen will stay on as well. When the
radio is off, the screen will turn off accordingly.
Note:
Dr.Prepare products are covered by a 12-month limited
warranty from the original purchase date. If any problems
occur, please contact our support team.
We only provide after-sales services for products that are sold
by Dr.Prepare or retailers and distributors authorized by
Dr.Prepare. If you have purchased your unit from other
channels, please contact your seller for more information
about return and warranty.
In FM mode, press the “RADIO/SLEEP” button to turn on the
timer. The sleep timer icon and “ :05 ” value will show up.
It means that FM radio will automatically turn off in 5 minutes.
You can press the “RADIO/SLEEP” button to choose the
desired timer (05 min,10 min, 15 min, 30 min, 45 min, 60min,
75 min, 90 min, and OFF).
If you choose “OFF” , it means that you will wake up to a
standard buzzer sound instead when the Alarm 1 is triggered.
Then, press the “AL1-2” button to confirm your setting.
When snooze icon starts flashing and “:05” will show up.
Use the “▲” or “▼” button to set the snooze time from 05
minutes to 60 minutes or OFF. Press the “AL1-2” button to
confirm your setting and start setting Alarm 2 .
The setting of Alarm 2 is the same as Alarm 1 . When you
finish the setting, the clock exits the alarm setting mode and
goes back to the time display.
There are two kinds of alarms: the standard buzzer sound and
the FM radio.
If you choose to wake up to the standard buzzer sound, the
clock will make “Bi” sound for 1 minute and icon “ ” or “ ”
keeps flashing. Press any button except the “ ” button to
stop alarm from ringing. The icon “ ” or “ ” will automatically
stop flashing as well.
When the alarm is ringing, press the “ ” button to enter the
SNOOZE mode. The alarm goes off again as the snooze timer
expires.
if you have disenabled the snooze function in the setting, there
will be no snooze timer. Press the the “ ” button and the
alarm stops instantly (and will not go off until the next day).
If you choose to wake up to the FM radio, the clock will
automatically turn on the radio for 30 minutes and icon “ ” or
“ ” keeps flashing. You can press the “AL1-2” button to stop
alarm from ringing or press to turn off the FM radio. The
icon “ ” or “ ” automatically stops flashing as well.
Alternatively, you can switch the radio frequency, adjust the
volume, or change other FM settings.
In normal time mode, short press the “AL1-2” button:
Press x1: shows up and Alarm 1 is activated
When time is displayed on the screen (normal time mode),
press “SET” button once to turn on Alarm 1 and twice to turn
on Alarm 2 .
In normal time mode, press and hold the “AL1-2” button for 3
seconds to enter the alarm setting mode. The Hour of Alarm 1
starts to flash. Use the button “▲” or “▼” button to set the
desired hour.
Press the “AL1-2” button to confirm your setting and move on.
The Minute of Alarm 1 starts to flash. Use the button “▲” or
“▼” button to set the desired minute. Then, press the “AL1-2”
button to confirm your setting.
Now “OFF” icon starts flashing on the screen. Use the button
“▲” or “▼” button to choose whether to wake up to the FM
radio or not (ON or OFF).
If you choose “ON”, it means that the FM radio will turn on to
wake you up when the Alarm 1 is triggered. When “L08”
flashes on the screen, use the button “▲” or “▼” button to
adjust the volume for the Alarm 1. Then, press the “AL1-2”
button to confirm your setting.
In the normal time mode, short press the “▲/Project” button to
adjust brightness: Low, High, and Off.
BACKLIGHT BRIGHTNESS
Short press “ ” to adjust the brightness of the LED screen:
Low, Medium, High, and Off.
When the screen is adjust to Off, short press any button except
the “ ” button to light up screen with Low brightness for 5
seconds.
Press and hold the “▲/Project” button to rotate the projection
image for 90° each time.
The effective projection range is from 3.3 feet to 9.8 feet.
You can press and hold the “▲” or “▼” button to speed up
setting.
1.
The clock will automatically save the settings and exit the
setting mode if no button is pressed within 20 seconds.
2.
1
1
1
1
1
1
1
1
1
1
Press x2: shows up and Alarm 2 is activated
Press x3: and both show up and alarms are both activated
Press x4: Both alarms are deactivated
1
2
2
2
2
2
2
1
2
2
If you have any questions or concerns, please send us an email
