Loading ...
Loading ...
Loading ...
5
CLEANING, STORAGE, AND
MAINTENANCE
To simplify cleaning, rinse the work bowl, cover,
and blade immediately after each use so that food
won’t dry on them. Wash blade, work bowl, and
cover in warm, soapy water. Rinse and dry. Wash
the blade carefully. Avoid leaving blade in soapy
water where it may disappear from sight.
The work bowl and cover can be washed on the
top rack of a dishwasher. Insert the work bowl
upside down and the cover right side up. The
blade can be washed in the cutlery basket. Unload
the dishwasher carefully to avoid contact with the
sharp blade. Wipe the motor base clean with a
damp sponge or cloth. Dry it immediately. Never
submerge the motor base or the plug in water or
other liquids.
The Cuisinart
®
3-Cup Mini Chopper stores neatly
on the countertop. When it is not in use, be sure
to leave it unplugged. The hidden cord storage
underneath the motor base will help to keep
excess cord off the countertop. Store the unit
assembled to prevent loss of parts. Store the blade
as you would sharp knives – out of the reach of
children.
The Cuisinart
®
3-Cup Mini Chopper is intended
for HOUSEHOLD USE ONLY.
Maintenance: Any service other than cleaning and
normal user maintenance should be performed by
an authorized Cuisinart Service Representative.
TROUBLESHOOTING
Motor doesn’t start or blade doesn’t rotate.
• Check that plug is securely inserted into outlet.
• Check that work bowl and cover are securely
locked into place.
• Be sure to press only one operation control
button at a time.
• This appliance comes with a resettable
protection device to prevent damage to the
motor in the case of extreme overload. Should
unit shut off unexpectedly, unplug it and let it
cool for at least 15 minutes before continuing.
Food is unevenly chopped.
• Try cutting food into smaller, even-sized pieces.
• Try processing smaller amounts of food per
batch.
Food is chopped too fine or is watery.
• The food has been overprocessed. Use brief
pulses, or process for a shorter time. Let blade
stop completely between pulses.
Food collects on work bowl cover or sides of
prep bowl.
• This is normal; turn machine off. When blade
stops rotating, remove cover and clean bowl
and cover with spatula.
Food catches on blade.
• You may be processing too much food.
Carefully remove blade. Remove food from
blade with a spatula and begin processing
again.
Loading ...
Loading ...
Loading ...