Loading ...
Loading ...
Loading ...
DS-1200KI/1006KI Keyboard User Manual
25
You can also press the Num + CAM buttons to select the input channel, and operate the PTZ
control.
For the initial use of MAG, you must use the configuration kits software to configure the
input/output channel ID of the MAG. Please see the related user manual for details. The
input/output channel ID is used for switching on the video wall or PTZ control during keyboard
operation.
DVR by RS-485
In DVR by RS-485 mode, the keyboard screen will display a prompt message asking you to confirm
your device version. If your NVR is of a 4.1.50 or later version, select Yes; otherwise, select No. If
your DVR is of a 3.5.35 or later version, select Yes; otherwise, select No. Please note that selecting
an incorrect device version may result in function unavailability.
If you encounter a camera control problem, try to change the device ID of your NVR or DVR to a
digit from 1 to 16.
The keyboard can connect with the DVR/NVR via RS-485 serial port, and remotely call the device
menu and realize PTZ control through the virtual panel.
Before you start:
Check the connection between the DVR/NVR and the keyboard. Connect the T+ ad T- terminals of
the RS-485 serial port of the keyboard with the KB port on the DVR/NVR rear panel respectively.
Our keyboard products support DVR/NVR with KB ports only.
Loading ...
Loading ...
Loading ...