Loading ...
Loading ...
Loading ...
8
Ductwork Installation
5. Use steel pipe to connect the 6” round plastic
collar {F} on the hood to the ductwork above.
Use duct tape to make all joints secure and air
tight. Refer to Figure 6.
Wiring to Power Supply
THIS RANGE HOOD MUST BE PROPERLY
GROUNDED. MAKE SURE THIS IS DONE BY
QUALIFIED ELECTRICIAN IN ACCORDANCE
WITH ALL APPLICABLE NATIONAL AND
LOCAL ELECTRICAL CODES. BEFORE
CONNECTING WIRES, SWITCH POWER OFF AT
SERVICE PANEL AND LOCK SERVICE PANEL
TO PREVENT POWER FROM BEING SWITCHED
ON ACCIDENTALLY.
6. If hood is operating normally, connect three
wires (black, white and green) to house wires
and cap with wire connections.
7. Store wires in the wiring box.
Install / Uninstall Accessories
8. Place the airflow efficiency panel underneath
the hood. Figure 7)
Final Assembly
9. Turn power ON in control panel. Check all lights
and fan operation.
10. Leave this Installation Instructions and
Operation Manual for the homeowner.
Figure 5
Figure 6
Figure 7
Loading ...
Loading ...
Loading ...