Loading ...
Loading ...
3
Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
8. Check signal strength.
(1) Enrollment succeeded: Flash green for 7 times.
Note: The front panel should be installed before powering on successfully.
(2) Check Signal Strength
Solid Green for 3 s - Strong Signal
Solid Orange for 3 s - Medium Signal
Solid Red for 3 s - Weak Signal
Flash Red for 6 times - Lost Signal
3
Installation
1
2
Signal Strength Test
4
1
2
5
6
13
3
7
8
9
1. Push the rear shell and the middle frame downward and remove them again.
2. Separate the rear shell and the middle frame.
3. Rotate the PIR button according to your actual needs.
4. Secure the rear panel with 2 screws. If the wall is not smooth enough, adjust the tamper screw to secure.
5. Install the middle frame back to the rear shell.
6. Install the front panel back.
7. Push the top and bottom covers back.
Loading ...
Loading ...
Loading ...