Loading ...
Loading ...
Loading ...
en Steam
16
6.
Fill the water tank with water up to the "max"
mark.
7.
Put the cover back into the opening on the water
tank.
8.
Insert the full water tank . When doing so, make
sure that the water tank clicks into place behind the
retainers .
9.
Slowly slide the control panel downwards and then
push it away from you until it is closed completely.
Refilling the water tank
When "Fill water tank" appears on the display, you
must refill the water tank.
Notes
¡ Steam, Dough proving, Defrost and Reheat func-
tions: If you do not refill the water tank, the appli-
ance will stop. Refill the water tank.
¡ Added steam and steam boost: If you do not refill
the water tank, the appliance continues to run
without added steam or steam boost.
1.
Open the control panel.
2.
Remove and refill the water tank.
3.
Insert the full water tank and close the control panel.
9.2 Steam heating functions
Your appliance has several types of steam heating.
→"Types of steam heating", Page10
ATTENTION!
A lot of steam is produced during operation with the
types of steam heating. Condensate that collects in the
drip trough underneath the cooking compartment may
overflow and damage adjacent units.
▶ Do not open the appliance door, or open it as infre-
quently as possible, while the appliance is in opera-
tion.
Steam
During "Steam", the food is enveloped by hot steam,
which helps to retain the nutrients. This cooking
method also helps to retain the shape, colour and typ-
ical flavour of the food.
When temperatures between 105°C and 120°C are
set, the cooking time is reduced. This means that even
more nutrients and vitamins are retained when steam-
ing.
Configuring the Steam heating function
Requirement:The cooking compartment has cooled
down sufficiently.
1.
Fill the water tank.
→"Filling the water tank", Page15
2.
Press to switch the appliance on.
3.
Press "Steam".
4.
Use or to select steaming.
5.
Press "Steam".
6.
Press "Temperature".
7.
Use or to select the temperature.
8.
Press to confirm the setting.
9.
Press "Cooking time".
10.
Use or to select the duration.
11.
Press to confirm the setting.
12.
Press to start the steaming process.
→"Pausing operation", Page15
a If the water tank runs dry during the steaming pro-
cess, the operation is paused.
→"Refilling the water tank", Page16
a Once the duration has elapsed, an audible signal
sounds and the appliance stops heating.
→"Switching off the appliance", Page14
13.
Press any button to end the signal tone.
14.
Empty the water tank and dry the cooking compart-
ment.
→"After using steam operation", Page18
Reheat
"Reheat" can be used to warm up food that has already
been cooked, or bread and pastries from the day be-
fore, without affecting their quality.
Configuring the Reheat heating function
Requirement:The cooking compartment has cooled
down sufficiently.
1.
Fill the water tank.
→"Filling the water tank", Page15
2.
Press
to switch the appliance on.
3.
Press "Steam".
4.
Use or to select reheating.
5.
Press "Reheat".
6.
Press "Temperature".
7.
Use or to select the temperature.
8.
Press to confirm the setting.
9.
Press "Cooking time".
10.
Use or to select the duration.
11.
Press to confirm the setting.
12.
Press to start the reheating process.
→"Pausing operation", Page15
a If the water tank runs dry during the reheating pro-
cess, the operation is paused.
→"Refilling the water tank", Page16
a Once the duration has elapsed, an audible signal
sounds and the appliance stops heating.
→"Switching off the appliance", Page14
Loading ...
Loading ...
Loading ...