FLUKE SMFT-1000/KIT User Manual for the Fluke SMFT-1000 Multifunction PV Tester and Performance Analyzer Kit with irradiance meter and current clamp, 1000 V, 20/400 A

Loading ...

Multifunction PV Analyzer

Maintenance

Battery Replacement

Replace the batteries with six AA batteries. Alkaline batteries are supplied with the Tester.

XW Warning

To prevent possible electrical shock, fire, or personal injury:

 Remove the test leads and any input signals before you replace the battery.

 Install ONLY specified replacement fuses with the amperage, voltage, and

interrupt ratings shown in the Specifications section of this manual.

To replace the batteries (see Figure 3):

1. Push

 to turn off the PV Analyzer.

2. Remove the test leads from the terminals.

3. To remove the battery door, use a standard-blade screwdriver to turn the battery door

screws (x3) one-quarter turn counterclockwise.

4. Push the release latch and slide the battery holder out of the Tester.

5. Replace the batteries.

6. Replace the battery holder and the battery door.

7. Turn the battery door screws one-quarter turn clockwise to fasten the door.

Figure 3. Battery Replacement

W FF 630 mA

1000 V IR 30 kA

1.888.610.7664 sales@GlobalTestSupply.com

Fluke-Direct.com

Loading ...

FLUKE SMFT-1000/KIT SMFT-1000 Multifunction PV Tester and Performance Analyzer Kit with irradiance meter and current clamp, 1000 V, 20/400 A