T-REX VHWJKFTR12AA Hydraulic Trolley Floor Jack User Manual

User Manual

[Revision 3.0]

READ THIS MANUAL CAREFULLY BEFORE USE – FAILURE TO DO SO MAY RESULT IN INJURY, PROPERTY DAMAGE AND MAY

VOID WARRANTY. • KEEP THIS MANUAL FOR FUTURE REFERENCE. • Products covered by this manual may vary in appearance,

assembly, inclusions, specifications, description, and packaging.

TFJ-12 Hydraulic Trolley Jack

E&OE © T-Rex 2

Safety

Safety messages are designed to alert you to possible dangers or hazards that could cause death, injury or

equipment or property damage if not understood or followed. Safety messages have the following symbols:

You WILL be KILLED or

SERIOUSLY INJURED if you do

not follow instructions.

You CAN be KILLED or

SERIOUSLY INJURED if you do

not follow instructions.

You CAN be INJURED if you do

not follow instructions or equipment

damage may occur.

It is vital that you read and understand this

user manual before using the product,

including safety warnings, and any assembly

and operating instructions. Keep the manual

for future reference.

Safety precautions and recommendations

detailed here must be fully understood and

followed to reduce the risk of injury, fire,

explosion, electrical hazard, and/or property

damage.

Safety information presented here is generic

in nature – some advice may not be

applicable to every product. The term

“equipment” refers to the product, be it

electrical mains powered, battery powered or

combustion engine powered.

• Before Use – If you are not familiar with

the safe operation/handling of the

equipment or are in any way unsure of any

aspect of suitability or correct use for your

application, you should complete training

conducted by a person or organization

qualified in safe use and operation of this

equipment, including fuel/electrical handling

and safety.

• Do NOT operate the equipment in

flammable or explosive environments, such

as in the presence of flammable liquids,

gases, or dust. The equipment may create

sparks or heat that may ignite flammable

substances.

• Keep clear of moving parts.

• Equipment may be a potential source of

electric shock or injury if misused.

• Do NOT operate the equipment if it is

damaged, malfunctioning or is in an

excessively worn state.

• Do NOT allow others to use the equipment

unless they have read this manual and are

adequately trained.

• Keep packaging away from children – risk

of suffocation! Operators must use the

equipment correctly. When using the

equipment, consider conditions and pay

due care to persons and property.

General Work Area Safety

•

Work areas should be clean and well it.

• Do not operate the equipment if

bystanders, animals etc are within

operating range of the equipment or the

general work area.

• If devices are provided for connecting dust

extraction / collection facilities, ensure

these are connected and used properly.

Dust collection can reduce dust-related

hazards.

General Personal Safety

•

Wear appropriate protective equipment

when operating, servicing, or when in the

operating area of the equipment to help

protect from eye and ear injury, poisoning,

burns, cutting and crush injuries. Protective

equipment such as safety goggles,

respirators, non-slip safety footwear, hard

hat, hearing protection etc should be used

for appropriate equipment / conditions.

Other people nearby should also wear

appropriate personal protective equipment.

Do not wear loose clothing or jewellery,

which can be caught in moving parts. Keep

hair and clothing away from the equipment.

• Stay alert and use common sense when

operating the equipment. Do not over-

reach. Always maintain secure footing and

balance.

• Do not use the equipment if tired or under

the influence of drugs, alcohol, or

medication.

• This equipment is not intended for use by

persons with reduced physical, sensory, or

mental capabilities.

General Fuel Safety

•

Petrol/fuel/gasoline is extremely flammable

– keep clear of naked flames or other

ignition sources.

• Do not spill fuel. If you spill fuel, wipe it off

the equipment immediately – if fuel gets on

your clothing, change clothing.

• Do NOT smoke near fuel or when

refuelling.

• Always shut off the engine before

refuelling.

• Do NOT refuel a hot engine.

• Open the fuel cap carefully to allow any

pressure build-up in the tank to release

slowly.

• Always refuel in well-ventilated areas.

• Always check for fuel leakage. If fuel

leakage is found, do not start, or run the

engine until all leaks are fixed.

General Carbon-Monoxide Safety

•

Using a combustion engine indoors CAN

KILL IN MINUTES. Engine exhaust

contains carbon-monoxide – a poison you

cannot smell or see.

• Use combustion engines OUTSIDE only,

and far away from windows, doors, and

vents.

General Equipment Use and Care

•

Keep packaging away from children and

pets, potential risk of suffocation or

choking.

• The equipment is designed for domestic

use only.

• Handle the equipment safely and carefully.

• Before use, inspect the equipment for

misalignment or binding of moving parts,

loose components, damage, or any other

condition that may affect its operation. If

damaged, have the equipment repaired by

an authorised service centre or technician

before use.

• Prevent unintentional starting of the

equipment – ensure equipment and power

switches are in the OFF position before

connecting or moving equipment. Do not

carry equipment with hands or fingers

touching any controls. Remove any tools or

other items that are not a part of the

equipment from it before starting or

switching on.

• Do not force the equipment. Use the

correct equipment for your application.

Equipment will perform better and be safer

when used within its design and usage

parameters.

• Use the equipment and accessories etc. in

accordance with these instructions,

considering working conditions and the

work to be performed. Using the equipment

for operations different from those intended

could result in hazardous situations.

• Always keep equipment components

(engines, hoses, handles, controls, frames,

housings, guards etc) and accessories

(cutting tools, nozzles, bits etc) properly

maintained. Keep the equipment clean and,

where applicable, properly lubricated.

• Store the equipment out of reach of

children or untrained persons. To avoid

burns or fire hazards, let the equipment

cool completely before transporting or

storing. Never place or store the equipment

near flammable materials, combustible

gases, or liquids etc.

• The equipment is not weather-proof, and

should not be stored in direct sunlight, at

high ambient temperatures or locations that

are damp or humid.

• Do not clean equipment with solvents,

flammable liquids, or harsh abrasives.

• For specific equipment safety use and care,

see Equipment Safety.

TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX `

TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX

TFJ-12 Hydraulic Trolley Jack

E&OE © T-Rex 3

General Electrical Safety

•

Inspect electrical equipment, extension

cords, power bars, and electrical fittings for

damage or wear before each use. Repair or

replace damaged equipment immediately.

• Ensure all power sources conform to

equipment voltage requirements and are

disconnected before connecting or

disconnecting equipment.

• When wiring electrically powered

equipment, follow all electrical and safety

codes.

• Always use a Residual Current Device

(RCD) (GFCI) / Earth Leakage Circuit

Breaker / Safety Switch when operating this

item (electrical items only).

• High voltage / high current power lines may

be present. Use extreme caution to avoid

contact or interference with power lines.

Electrical shock can be fatal.

General Electrical Safety

•

Electrically grounded equipment must have

an approved cord and plug and be

connected to a grounded electrical outlet.

• Do NOT bypass the ON/OFF switch and

operate equipment by connecting and

disconnecting the electrical cord.

• Do NOT use equipment that has exposed

wiring, damaged switches, covers or

guards.

• Do NOT use electrical equipment in wet

conditions or in damp locations.

• Do NOT use electrical cords to lift, move or

carry equipment.

• Do NOT coil or knot electrical cords, and

ensure electrical cords are not trip hazards.

General Service Information

•

The equipment must be serviced or

repaired at authorised service centres by

qualified personnel only.

• Replacement parts must be original

equipment manufacturer (OEM) to ensure

equipment safety is maintained.

• Do NOT attempt any maintenance or repair

work not described in this manual.

• After use, the equipment and components

may still be hot – allow the equipment to

cool and disconnect spark plugs and/or

electrical power sources and/or batteries

from it before adjusting, changing

accessories, or performing repair or

maintenance.

• Do NOT adjust while the equipment is

running.

• Perform service-related activities in suitable

conditions, such as a workshop.

• Replace worn, damaged or missing

warning/safety labels immediately.

Child Choking Hazard!

• W

ARNING: CHOKING HAZARD – CHILDREN UNDER 8 YRS. CAN CHOKE OR SUFFOCATE ON SMALL PARTS. ADULT

SUPERVISION REQUIRED.

• Carefully inspect anything a baby or child could gain access to, including this product & packaging.

• Dangers include anything of a size that could become stuck or lodged in a baby or child’s airway.

• Dangers include things like raw, hard fruit and vegetable pieces, large pieces of meat, bones or sausage skins, popcorn, nuts,

hard lollies and corn chips, small magnets and batteries, coins, beads, marbles and small uninflated balloons, broken toys and smaller toys,

buttons, keys, and coins. But there are also many more.

• Pay particular attention to accessories, nuts, bolts, screws, washers, caps, covers, loose parts, parts that could be removed or break off, pieces

of packaging, staples, tape etc.

• In the case of any doubt, secure the item of concern in an appropriate manner, or completely remove the possibility of access by a baby or child.

Product Safety

•

Please read these instructions carefully before using the product for the first time and store them for future reference. This product must be

operated in accordance with these instructions at all times. Make these instructions for use accessible to all persons who will be working with this

product. This applies also when reselling the product.

• We cannot assume any liability for any accidents or damage that may arise due to non-observance of this guide, or the safety instructions

contained therein. Any structural modifications to the product will void the manufacturer’s warranty!

• This product is intended for private use only!

Intended Use / Safety Instructions

•

This product is a hydraulic trolley jack for lifting motor vehicles. It is intended for use as a lifting device only.

• Ensure that the load to be lifted does not exceed the maximum permissible load of the jack. The maximum load of 1.2 tonnes must not be

exceeded otherwise the jack may become damaged and safety compromised.

• Use the jack on a firm, even surface only. Instability or slipping of the load may occur on soft or uneven surfaces. Consequential damage to the

vehicle or persons cannot then be precluded. (Risk of accident!).

• Make sure there are no persons inside the vehicle being lifted. Position the hydraulic jack so that no part of your body will be under the vehicle

while it is being lifted.

• Never work under a car that is being supported only by the hydraulic jack. Always use additional supports.

• Before lowering the hydraulic jack, ensure there are no persons or objects under the vehicle.

• Never leave the hydraulic jack unattended for longer periods when it is supporting a load as it can lose pressure and begin to sink for design-

related reasons. Therefore, place something underneath the lifted load immediately! Never get into the vehicle or start its engine while it is on the

hydraulic jack.

• Never use the car jack to life persons. Do not use the car jack with people inside or leaning against the vehicle.

• The user must keep eyes on the jack and the load during all movement.

• The condition of the markings on the car jack must be checked regularly and the markings must always correspond with the original markings.

• DO NOT USE THE CAR JACK IN THE FOLLOWING SITUATIONS:

• Outdoors in frost/rain/strong winds.

• In severe conditions (e.g., Very cold or very hot weather, when exposed to strong magnetic radiation and similar situations).

• In potentially explosive environments, mines and similar situations.

• When lifting loads containing the following materials, among others: molten metal, acid, radioactive material or loose/not firmly connected

goods and similar situations.

TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX `

TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX

TFJ-12 Hydraulic Trolley Jack

E&OE © T-Rex 4

• In contact with food and similar situations.

• On ships and in similar situations.

• To avoid any risk of being crushed or sustaining other injuries: NEVER work on, under or around a load supported only by a jack. ALWAYS use

adequately rated jack stands. If the generated efforts exceed 400N (approx. 40kg), the effort shall be lowered by additional person.

• Do not alter or modify the car jack which will adversely affect the car jack’s compliance with standard EN 1494:2000+A1:2008. Only attachments

and/or adaptors supplied by the manufacturer shall be used. Only lift the vehicle using the jacking points specified by the vehicle manufacturer.

• WARNING: LIFTING OF PERSONS PROHIBITED!

Safety Warnings – Hydraulic Jacks

Safe Usage – Hydraulic Jacks

•

The jack should be used on level firm ground wherever possible.

• The wheels of the vehicle to be chocked.

• No person should remain in a vehicle that is being jacked.

• No person should place any portion of his or her body under a vehicle supported by a jack.

TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX `

TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX

TFJ-12 Hydraulic Trolley Jack

E&OE © T-Rex 5

Safety Symbols

The product may have safety warning labels attached to it, explained below. Understand the symbols on your

product and their meanings. If any stickers become unreadable, unattached etc., replace them.

Flammable Material Hazard

Flammable liquids, gases, or

substances etc may present.

Avoid ignition sources and open

flames. Danger of fire.

Read User Manual

Read and fully understand

product safety warnings,

operation, procedures etc before

using the product.

Use Hand Protection

Wear appropriate hand protection

and take due care as the product

or use of the product may present

hand hazards.

Carbon-Monoxide Hazard

Do not use the product in

confined areas or without

adequate ventilation. Carbon-

monoxide poisoning can be fatal.

Electrocution / Electrical Shock

Hazard

High voltage or high current

electricity may be present or

required by the product. Take

due care when handling electrical

products, cables, plugs and

leads. Electrical shock can be

fatal.

Toxic Fumes / Dust Hazard

Using the product or by-products

from use may produce fumes,

smoke or particles that could be

harmful if inhaled. Wear

appropriate breathing protection

and have adequate ventilation.

Explosive Material Hazard

Combustible liquids, gases, or

substances etc may be present.

Avoid ignition sources and open

flames. Danger of explosion.

Cutting / Amputation Hazard

The product may have blades,

edges or mechanical devices that

can cause severe cut injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Crush Hazard

The product may have blades,

edges or mechanical devices that

can cause severe crush injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Single Operator Only

The product must be operated by

a single person only. More than

one person operating the product

may introduce additional hazards.

Use Face Protection

Wear appropriate full-face

protection and take due care as

the product or use of the product

may present face and eye

hazards.

Use Foot Protection

Wear appropriate foot protection

and take due care as the product

or use of the product may present

foot hazards.

Use Eye / Ear / Head Protection

Wear appropriate eye and / or

ear and / or head protection and

take due care as the product or

use of the product may present

eye, hearing, and head hazards.

Running Hazard

Do not run on or near the product

as doing so may present a fall

hazard.

Diving Hazard

Do not dive into the product as

doing so may present a neck /

head injury hazard.

Adult Supervision Required

Always supervise children and

other users of a product to

prevent drowning or injury.

Skin Penetration / Puncture

Hazard

The product may produce

pressure, emit liquids or objects

that can cause severe injury to

fingers, limbs, blood etc. Take

due care when handling and

using the product.

Hot Surface Hazard

Be aware that the product may

produce high temperatures and

hot surfaces that can cause burn

injuries.

Flying Debris Hazard

Be aware that the product or use

of the product may present

hazards produced by flying

debris. Wear appropriate clothing

and protective devices.

Moving Parts Hazard

Be aware that the product

contains or uses mechanical

devices that move or rotate.

Always wait for moving parts to

stop fully before handling the

product, adjusting, maintenance

etc.

TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX `

TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX

TFJ-12 Hydraulic Trolley Jack

E&OE © T-Rex 6

Carbon-Monoxide Hazard

Do not use the product in

confined areas or without

adequate ventilation. Carbon-

monoxide poisoning can be fatal.

Pull Hazard

Be aware that the product

contains or uses mechanical

devices that can pull in objects

and can cause severe injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Slope / Fall Injury Hazard

Be aware that using the product

on sloping surfaces or in slippery

conditions may present additional

dangers from falls and contact

with blades, moving parts, hot

surfaces etc.

“Slam Dunk” Warning

Do NOT attempt “slam dunk”

manoeuvres as this may result in

severe injury due to falling,

product breakage or collapse etc.

Electrocution / Electrical Shock

Hazard – Outdoor

High voltage or high current

electricity may be present or

required by the product. Do NOT

use in rain, damp, or wet

conditions. Electrical shock can

be fatal.

Electrocution / Electrical Shock

Hazard – Disconnect

High voltage or high current

electricity may be present or

required by the product. Always

disconnect the product from the

electrical supply before handling

the product, adjusting,

maintenance etc.

Power Line Electrocution

Hazard

High voltage / high current power

lines may be present. Use

extreme caution to avoid contact

or interference with power lines.

Electrical shock can be fatal.

“Kick-Back” Hazard

High level of “kick-back” hazard

that can cause the machine to

suddenly rotate towards operator.

Kick-back injury can be fatal.

Winch Operator Position

Hazard

Do NOT stand between winch

and load. Do NOT use winch to

move people.

Winch Lift Hazard

Do NOT LIFT load vertically. Use

machine to PULL only.

Cable Hazard

Ensure that load bearing cable is

not kinked or knotted.

Winch Cable Hazard

Ensure that there is a minimum

number of cable coils on

winching mechanism.

Winch Hook Hazard

Carry hook to load – do NOT

throw or run.

Flash / Blinding Hazard

Wear appropriate eye protection

for welding. Direct exposure to

weld arcs may cause permanent

eye injury.

Laser Hazard

Laser may be in use – do NOT

look directly at laser or allow

others to.

Choking Hazard

Children under 8 yrs. Can choke

or suffocate on small parts. Adult

supervision required.

TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX `

TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX

TFJ-12 Hydraulic Trolley Jack

E&OE © T-Rex 7

Table of Contents

Safety ............................................................................................................................................................. 2

Safety Symbols ........................................................................................................................................................... 5

Operation ....................................................................................................................................................... 8

Maintenance ................................................................................................................................................ 10

Troubleshooting ......................................................................................................................................... 11

Specifications ............................................................................................................................................. 12

TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX `

TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX

TFJ-12 Hydraulic Trolley Jack

E&OE © T-Rex 8

Operation

Before using the hydraulic trolley jack, check for loss of oil, damage, or missing accessories.

First time operation:

1. Loosen the oil filling plug a couple of turns before inserting the handle and extension. Once you have

inserted the handle pump the arm approx. 6 pumps.

2. Close the drain valve – the vehicle jack is now ready for use.

Lifting the vehicle:

1. Locate your vehicle on an even, firm surface and secure the vehicle against rolling as specified by the

vehicle manufacturer.

2. To ensure safe lifting, position the jack at a 90° angle to the vehicle and under the appropriate jacking point

(see the manufacturer’s instructions).

3. Insert the handle into the socket and close it by rotating clockwise until it stops.

4. Insert the handle in the pumping arm and pump the handle until the saddle is in contact with the vehicle.

5. Check again that the jack is seated correctly.

6. Continue pumping the handle until the vehicle has been lifted to the desired height.

CAUTION: Observe the vehicle carefully during the lifting operation. The jack should move in the

direction of the vehicle during lifting. Should this not be the case, there is a strong possibility that

the vehicle will slide off the jack.

7. Put the handle out of the pumping arm. (Risk of accident!)

8. Secure the load with suitable jack stands before commencing work on or under the vehicle.

CAUTION: Working on or under the vehicle without first appropriately securing the raised load is

prohibited! (Risk of accident!)

9. After you have finished working on the vehicle, carefully twist the handle in small increments in a

counterclockwise direction until the vehicle begins to move downward.

10. Once the vehicle is firmly on the ground, you can turn the handle one half turn to return the arm back to the

bottom starting position.

TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX `

TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX

TFJ-12 Hydraulic Trolley Jack

E&OE © T-Rex 9

11. Before lifting the load, check that the arm is properly secured into the socket..

12. All moving parts must be lubricated in accordance with the operators’ manual and maintained on a regular

basis.

13. If the jack is broken during using, get a new jack, with which you can lift the car, so that the defect jack can

be removed. If you are unsure, please ask for professional help.

Storage and Care:

1. When the vehicle jack is not in use, the lifting arm should be in the lowest position and the handle in an

upright position to protect the precision mechanics from damage. The vehicle jack must be stored in a

horizontal position and in a dry location. Ensure the jack remains in its original condition. Do not undertake

any modifications to the device.

2. Use only SAE10 (SAE: Society of Automotive Engineers) grade, special-purpose hydraulic oil for the pump.

Dispose of all used and spilled oil appropriately.

3. Do not use a high-pressure cleaner to clean the jack. All external moving parts, e.g., the foot roller bearings,

fastening bolts of the lifting arm, fastening bolts of the lifting arm cylinder, and fastening bolts of the pumping

arm must be well lubricated regularly every 3 months.

IMPORTANT: Never lubricate or grease the rods of the pump and lifting cylinder.

4. All maintenance and repair work must be performed by suitably qualified personnel and in accordance with

the manufacturer’s instructions.

CAUTION: Do not use the jack if there are any missing, loose, or broken parts!

TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX `

TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX

TFJ-12 Hydraulic Trolley Jack

Maintenance

ATTENTION: Surface corrosion will occur on metal surfaces over time and the rate of oxidation depends

on factors such as proximity to the ocean and humidity or condensation of water vapour on metal

surfaces. To mitigate this, WD40 can be used to remove surface corrosion then, when applied

periodically, it will prevent rust from forming.

General

•

Need to check the state of the markings and that the markings remain as the initial one.

•

Jacks shall be maintained and repaired in accordance with the manufacturer instructions. Such maintenance

and repair shall be carried out by qualified persons.

•

No modifications shall be carried out which adversely affect the compliance of the jack with this standard.

Disposal

The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities.

Contact your local refuse disposal authority for more details of how to dispose of your worn-out product. Dispose

of the hydraulic oil in an environmentally compatible manner. Ask your local repair garage to see to its disposal

or find your nearest waste materials collection centre.

Check Oil Level

1. Turn release valve counterclockwise to allow ram to fully retract. It may be necessary to apply force to the

saddle for lowering.

2. Remove the inspection plate.

3. With the jack in the level position, remove the oil fill plug. Stand jack in vertical position with handle socket

down. The oil should be level with the bottom of fill hole. If not, top off. Do not overfill. Always fill with new,

clean hydraulic jack oil.

4. Replace fill plug and inspection plate.

5. Check jack operation.

6. Purge air from system as required.

7. Do not use brake or transmission fluids or regular motor oil as they can damage the seals. Always purchase

and use products labelled Hydraulic Jack Oil.

TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX `

TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX

TFJ-12 Hydraulic Trolley Jack

Troubleshooting

NOTE: The instructions below must not be carried out while the vehicle jack is In use. The vehicle jack is

equipped with a safety valve. It has been configured to allow the vehicle jack to lift loads up to 2 tonnes.

The safety valve must not be modified or adjusted in any way!

Problem 1: The lifting arm won’t raise when pumping under load.

•

Check whether the drain valve is fully closed. Close it by rotating the handle clockwise.

•

Check the oil level by placing the vehicle jack in a horizontal position.

•

Not enough oil. Top up the hydraulic oil and purge the hydraulic system.

Problem 2: The lifting arm is sinking under load.

•

Follow the instructions provided for “Problem 1”. Should this still not eliminate the fault, the vehicle jack

needs to be repaired by an authorized repairer.

Problem 3: The lifting arm can’t be lowered.

•

The tension spring for the lifting arm has unhooked or broken. Re-hook the spring or replace the broken

spring by an equivalent new spring.

•

The vehicle jack presumably needs lubricating. All moving parts must be cleaned and lubricated or greased.

IMPORTANT: The rods of the pumping and lifting cylinder should never be lubricated or greased.

•

Too much oil in the hydraulic system. Screw out the drain valve and drain out the excess oil.

TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX `

TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX

TFJ-12 Hydraulic Trolley Jack

Specifications

Maximum Load Capacity 1,200kg

Type Hydraulic

Material Aluminium, Steel

Finish Powder Coated

Min Height 88mm

Max Height 358mm

Certification AS/NZ 2615:2016

TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX `

TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX

Some experts believe that the incorrect or prolonged use of almost any

product may cause serious injury or death. To help reduce your risk of

serious injury or death, refer to the information below. For more information,

see www.datastreamserver.com/safety



Consult all documentation, packaging,

and product labelling before use. Note

that some products feature

documentation available online. It is

recommended to print and retain the

documentation.



Before each use, check the product for

loose/broken/damaged/missing parts,

wear, or leaks (if applicable). Never use a

product with

loose/broken/damaged/missing parts,

wear, or leaks.



Products must be inspected and serviced

(if applicable) by a qualified technician

every 6 months. This is based on

average residential use by persons of

average size and strength, and on a

property of average metropolitan size.

Use beyond these recommendations may

require more frequent

inspections/servicing.



Ensure that all users of the product have

completed a suitable industry recognised

training course before being allowed

access to the product.



The product has been supplied by a general merchandise

retailer that may not be familiar with your specific

application or description of application. Be sure to attain

third-party approval from a qualified specialist for your

application before use, regardless of any assurances from

the retailer or its representatives.



This product is not intended for use where fail-safe

operation is required. As with any product (for example,

automobile, computer, toaster), there is the possibility of

technical issues that may require the repair or

replacement of parts, or the product itself. If the possibility

of such failure and the associated time it may take to

rectify could in any way inconvenience the user, business,

or employee, or financially affect the user, business, or

employee, then the product is not suitable for your

requirements. This product is not intended for use where

incorrect operation or a failure of any kind, including but

not limited to, a condition requiring product return,

replacement, parts replacement, or service by a

technician may cause financial loss, loss of employee

time or an inconvenience requiring compensation.



If this product has been purchased in error when

considering the information presented here, contact the

retailer directly for details of their returns policy, if

required.

diagrams, or images may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying, scanning, or recording, or any information storage and retrieval system,

without express permission or consent from the publisher.

T-REX VHWJKFTR12AA Hydraulic Trolley Floor Jack

Product's Documents

Product manual

Specifications

T-REX VHWJKFTR12AA Questions and Answers