Loading ...
Loading ...
Loading ...
12
DOOR REMOVAL
C
A
B
Auto Closer
5. Repeat steps 1-7 for the freezer door.
6. Lower the refrigerator door in the
opened position on the bottom
hinge pin and close the door.
1
2
Refrigerator Door
Door Bearing Reversal For
Freezer and Refrigerator Doors
1. With a flathead screwdriver, pry out
the center hinge bearing plug from
the left side of the refrigerator door
and discard.
2. Remove the new left side hinge
bearing from the literature bag and
install it on the left side by tapping
it with a hammer until it is flush with
the end cap.
3. Reverse the door handle if applica-
ble (see DOOR HANDLE INSTALLA-
TION section).
4. A. Flip the refrigerator door over
and remove the screw from the
auto-closer hook using a multi-
bit screwdriver with a #2 square
bit and set it aside.
B. Pry out the hinge bearing
from the door with a flat head
screwdriver.
C. Install the bottom hinge bearing
on the opposite side of the door.
Flip the auto-closer hook over
and install on the opposite side
of the door.
Center Hinge Bearing
7. Screw in and tighten the center hinge
pin using an adjustable wrench.
Center Hinge Pin
Loading ...
Loading ...
Loading ...