Loading ...
Loading ...
Loading ...
11
DOOR REMOVAL
Hinge
Pin
Center
Hinge
Screws
Center Hinge
x
x
x
Remove Pan Head Screws
Door
Stopper
Door
Stopper
Screw
Bottom Hinge
Pin
Bottom Hinge
Door Stopper
5. Unscrew the center hinge pin using
an adjustable wrench and set it
aside.
6. Open the refrigerator door and lift
the door o of the bottom hinge pin.
Set the door aside.
7. Remove the 3 pan head screws
using a multi-bit screwdriver with a
#2 square bit.
8. Remove the 3 screws from the center
hinge using a multi-bit screwdriver
with a #2 square bit. Flip the center
hinge over and install it on the left
side of the unit.
9. Remove both lower hinge covers
if installed.
12. Install the bottom hinge pin in the left-
hand hole of the left-hand lower hinge.
13. With the assistance of another
person, tilt the appliance back, to
have access to the bottom hinge.
Loosen the hinge screws slightly.
flip the door stopper, and place it
on top of the bottom hinge, making
adjustments until the stopper is flush
against the unit. Tighten all screws.
CAUTION
Place the doors on a padded surface to
avoid damage where they cannot fall
and cause personal injury.
x
x
x
Install Pan Head Screws
Install the 3 pan head screws on the
right side.
10. Remove the screw from the door
stopper with a multi-bit screwdriver
with a #2 square bit .
11. Unscrew the bottom hinge pin from
the right-hand position using an
adjustable wrench.
Loading ...
Loading ...
Loading ...