Loading ...
Loading ...
Loading ...
Microwave en
15
1.
Place the empty cookware in the cooking compart-
ment.
2.
Set the appliance to run for 30 seconds to 1 minute
at maximum power.
3.
Start the operation.
4.
Check the cookware several times:
‒ If the cookware remains cold or warm to the
touch, it is suitable for microwave use.
‒ If the cookware becomes hot or sparks are cre-
ated, stop the cookware test. The cookware is
not microwave-safe.
9.2 Microwave-only operation
The electromagnetic waves of the microwave alone
generate energy and this is converted into heat in food,
for example.
To prevent condensation, when the microwave output
is "600W" and "Boost", the appliance automatically
switches on a heating element. The cooking compart-
ment and the accessories become hot. The cooking
result is not affected by this.
You can switch off this automatic drying function in the
basic settings.
→"Basic settings", Page18
WARNING‒Risk of burns!
At the highest settings in microwave only mode, the
drying function will automatically switch on an addi-
tional heating element to heat the cooking compart-
ment.
▶ Never touch the inside surfaces of the cooking com-
partment or the heating elements while they are hot.
▶ Keep children at a safe distance.
Setting the microwave
Note:
Note the correct way to operate the microwave:
¡ →"Safety", Page2
¡ →"Preventing material damage", Page6
¡ →"Microwave power settings", Page10
¡ →"Cookware and accessories with microwave",
Page14
1.
Press
.
2.
Press the required microwave output setting.
→"Microwave power settings", Page10
3.
Press
to confirm the setting.
4.
Press "Cooking time".
5.
Use or to select the duration.
6.
Press to confirm the setting.
7.
Press to start the microwave operation.
a The microwave starts and the cooking time counts
down. The display shows the performance reduction
for the maximum microwave output "Boost".
→"Microwave power settings", Page10
a When the time has elapsed, a signal sounds. A noti-
fication appears on the display confirming that the
operation has finished.
8.
Press any button to end the signal tone.
9.
If condensation has formed in the cooking compart-
ment, dry the cooking compartment.
→"Drying", Page24
Note:If you open the appliance door during operation,
the operation stops. If you close the appliance door,
you must continue the operation. If you have changed
the basic setting for this, make sure that the microwave
does not resume operation without food inside.
→"Basic settings", Page18
Changing the microwave output
1.
Press
.
2.
Press the required microwave output setting.
3.
Press to confirm the change.
9.3 Added microwave
Adding the microwave to a type of heating or function
reduces the cooking time.
Types of heating and functions for added
microwave
You can switch on added microwave for the following
types of heating and functions:
¡ "Hot air"
¡ "Top/bottom heat"
¡ "Circo-roasting"
¡ "Full-surface grill"
¡ "Centre-area grill"
¡ →"Dishes", Page17
Possible microwave output settings combined with a
type of heating or function include:
¡ "90W"
¡ "180W"
¡ "360W"
Setting added microwave
Note:
Note the correct way to operate the microwave:
¡ →"Safety", Page2
¡ →"Preventing material damage", Page6
¡ →"Microwave power settings", Page10
¡ →"Cookware and accessories with microwave",
Page14
Requirement:Observe the information about the re-
spective type of heating or function.
1.
Set a suitable type of heating or function.
→"Types of heating and functions for added mi-
crowave", Page15
2.
Set the required temperature.
3.
Press "Microwave".
4.
Press the required microwave output setting:
– "90W"
– "180W"
– "360W"
5.
Press
to confirm the setting.
6.
Press "Cooking time".
7.
Use or to select the cooking time.
8.
Press to confirm the setting.
9.
Press to start operation with added microwave.
a The appliance starts to heat and the time counts
down.
a When the time has elapsed, a signal sounds. A noti-
fication appears on the display confirming that the
operation has finished.
10.
Press any button to end the signal tone.
Cancelling added microwave
1.
Press
.
2.
Press "Microwave".
3.
Press "Off".
Loading ...
Loading ...
Loading ...