Loading ...
Loading ...
Loading ...
9
Operation
Touch Control
Calibration
Upon application of electrical power to the grill,
the controller will run a self-calibration process.
The controller will then sound an audible
conrmation tone and the display will briey
illuminate. The grill is now ready to be used.
For proper calibration the glass above the
controller must be clear of any debris.
Power On Indicator
This display indicates whether the grill is ON or
OFF.
Power Level Display
Digital display indicates heat output of grill. The
indicator lamps follow the sweep of the screened
graphic. There are eight possible heat levels.
(+) Power Sensor
Touching this sensor will increase the heat
output of the grill in increments of one.
(-) Power Sensor
Touching this sensor will decrease the heat
output of the grill in increments of one.
Power Level Graphic
Depicts the level of heat output by the element.
The line sweeps from thin to thick, indicating low
to high power.
Master Power Sensor
This is the main power control for the grill.
Touching this with the grill OFF will activate the
controller and turn the grill ON. Touching this
sensor with the grill ON will shut the grill OFF.
Turning On the Grill
Place and hold a nger over the circular area
marked ON/OFF (Master Power Sensor) on
the control panel for 2 seconds. An audible
beep will be heard again and the Power On
Indicator will illuminate.
POWER LEVEL
DISPLAY
MASTER
POWER SENSOR
POWER LEVEL
GRAPHIC
POWER ON
INDICATOR
(-) POWER
SENSOR
(+) POWER
SENSOR
Your Kenyon Grill has 8 different heat settings,
1 through 8, selected using the (-) and (+)
sensors. The heat setting is displayed as shown
on page 10.
Touching the + rst will incrementally set the
heat level from settings 1 thru 8 with a beep
corresponding number of lights illuminated.
Heat Settings
POWER ON
INDICATOR
MASTER
POWER SENSOR
Loading ...
Loading ...
Loading ...