Loading ...
Loading ...
Loading ...
10
Operation
Turning Off the Grill
To turn off the grill, simply touch and hold the
Master Power Sensor for two seconds. The
controller will de-energize and shut off the
heating element.
IN AN EMERGENCY THE 120V GRILL CAN BE
TURNED OFF BY PRESSING THE “TEST”
BUTTON ON THE GFCI. REFER PAGE 11.
Automatic Shut-Off
The electronic control of your KENYON grill
has been programmed with safety in mind and
features an automatic shut-off. The grill is
programmed to shut down after predetermined
time after being energized (reference the preheat
and automatic shut-off table). The control will
also shut off if it reaches a preset temperature
limit. If this occurs, allow the grill to cool down
for 20-30 minutes.
Preheat and Automatic
Shut-Off Time
The grill will preheat at full power for the
specied time and heat settings listed in the
table below. In the number 8 setting there is no
preheat as the grill is at full power all ready. This
preheat function brings the grate/griddle to the
desired grilling temperature quicker thus allowing
you to begin grilling quicker.
SETTING
PREHEAT
TIME (min)
AUTOMATIC
SHUT-OFF (min)
1 1 90
2 3 90
3 5 90
4 5 60
5 7 60
6 7 60
7 7 60
8 8 60
Temperature Guide
The following is meant to be a guideline.
Individual results may vary depending on
conditions. Factors such as wind, and outside
temperatures, food temperature when placed on
grill can affect cooking times. The grill is
designed and engineered for optimal cooking
performance with the lid down or closed.
SETTING FOOD TYPES
1
Fried eggs on griddle
2
Pancakes - French toast on griddle
3
Vegetables
4
Vegetables - Fish
5
Fish - Chicken
6
Chicken - Hamburgers
7
Hamburgers - Steaks
8
Steaks
The heating element cycles at different time
intervals to vary the heat level. As the setting
is increased, the heating element will remain
on for a longer period, increasing the cooking
temperature of the grill.
Heat Boost
Touching the - rst will activate the heat boost
mode and will set heat level to the highest
setting. The setting will start at 8 and
incrementally decrease to heat level 1.
To change the heat level
Place a nger on + or - graphic of desired
element to change heat level incrementally up
or down.
POWER LEVEL
DISPLAY (HEAT
SETTING 8
SELECTED)
Loading ...
Loading ...
Loading ...