Loading ...
Loading ...
Loading ...
6
Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
8
Specification
UD30136B
7
Operation Caution and Device Maintenance
- All the electronic operation should be strictly compliance with the electrical safety regulations, re prevention regulations and other related
regulations in your local region.
- Do not drop the device or subject it to physical shock, and do not expose it to high electromagnetism radiation. Avoid the equipment
installation on vibrations surface or places subject to shock (ignorance can cause equipment damage).
- Please make sure that the power has been disconnected before you wire, install or dismantle the device.
- If smoke, odors or noise rise from the device, turn o the power at once and unplug the power cable, and then please contact the service
center.
- Do not drop the device or subject it to physical shock, and do not expose it to high electromagnetism radiation. Avoid the equipment
installation on vibrations surface or places subject to shock (ignorance can cause equipment damage).
- Do not place the device in extremely hot (refer to the specication of the device for the detailed operation temperature), cold, dusty or
damp locations, and do not expose it to high electromagnetic radiation.
- The device for indoor use shall be kept from rain and moisture.
Exposing the equipment to direct sun light, low ventilation or heat source such as heater or radiator is forbidden (ignorance can cause re
danger).
- Do not aim the device at the sun or extra bright places. A blooming or smear may occur otherwise (which is not a malfunction however), and
aecting the endurance of sensor at the same time.
- Improper use or replacement of the battery may result in hazard of explosion. Replace with the same or equivalent type only. Dispose of
used batteries according to the instructions provided by the battery manufacturer.
- Do not expose the device to the corrosive gas. Otherwise the equipment damage may occur.
- Do not expose the device to the explosive situation.
6
Set Up with App
You can view the device status including temperature, signal intensity, battery level, lid, external input, etc.,on the device page.
Tap the button to enter the settings page.
Detection Method Passive Infrared
Detection Range 15 m(12m according to EN50131-2-2)
Detection Angle 180°
Detection Zones 40
Detectable Speed 0.3 to 2 m/s
Sensitivity Auto, Low
White Light Filter 20000lux
Pet Immunity Up to 40 Kg
Digital Temperature Compensation Support
Anti-masking Support
Adaptable Coverage Pattern mask included
Digital Processing Support
Sealed Optics Support
Tamper Protection Front, Rear
Environment Temperature Indicator Support
Signal Strength Indicator Support
Power Switch Power Up Enrolling
LED Indicator Blue(Alarm), Green+Orange(Mask), Orange(Fault)
Transmission Technology Tri-X Wireless
Transmission Method Two-Way RF Wireless
Transmission Frequency 868/433 MHz
Transmission Security AES-128 Encryption
Transmission Range(Free Space) 1.6/1.2 Km
Frequency Hopping Support
Enrolling Method Power up, Remote ID, QR Code
Standard Battery Life
5 years in work status
(Standalone: being triggered 20 times per day
With camera integrated: being triggered and
completely uploading captures once per day)
Power Supply Battery Powered
Battery Type CR123A × 5
Typical Voltage 3 V
Operation Temperature -25 °C to 60 °C (-13 °F to 140 °F)
Storage Temperature -25 °C to 60 °C (-13 °F to 140 °F)
Operation Humidity 10% to 90%
IP Rate IP65
Dimension(W × H × D) 75 mm × 202 mm × 73 mm
Weight 512.5 g
Mounting Height 0.8 to 1.2m(traditional 1 m)
Mounting Method Wall
Application Scenario Outdoor