Axis 0232-003 EOL 240Q 4-Channel Video Server 0232-003

Axis 240Q User Manual - Page 42

For 0232-003 EOL.

PDF File Manual, 66 pages, Read Online | Download pdf file

0232-003 EOL photo
Loading ...
Loading ...
Loading ...
42
AXIS 240Q - System Options
vices section. Click Details and then select UPnP™ as the service to add.
Bonjour
Your Axis network camera includes support for Bonjour. When enabled, the camera is
automatically detected by operating systems and clients that support this protocol.
Ports & Devices
I/O Ports - the pinout, interface support and the control and monitoring functions
provided by this connector are described in Unit Connectors,
on page 45.
RS232
- The COM port RS-232 on the AXIS 240Q supports several operational modes
listed on this page. For more information, please see COM Ports RS-232 and RS-485, on
page 47.
RS485
- The COM ports on the AXIS 240Q supports several operational modes listed on
this page. For more information, please see COM Ports RS-232 and RS-485, on page
47.
Maintenance
Restart - The unit is restarted without changing any of the settings. Use this method if
the unit is not behaving as expected.
Restore - The unit
is restarted and most current settings are reset to factory default val-
ues. The settings that will not be reset are:
the boot protocol (DHCP or static)
the static IP address
the default router
•the subnet mask
the system time
De
fault - The default button should be used with caution. Pressing this will return all of
the video server's settings (including the IP address) to the factory default values.
Upgrade Server - Se
e Upgrading the Firmware, on page 48.
Backup -
To take a backup of all of the parameters, and any user-defined scripts, click this
button. If necessary, it is then possible to return to a previous configuration if settings are
changed and there is unexpected behavior.
Restore - click the Browse
button to locate the saved backup file (see above) and then click
the Restore button. The settings will be restored to the previous configuration.
Note:
Backup and Restore can only be used on the same unit running the same firmware. This feature is not
intended for multi-configurations or for firmware upgrades.
Loading ...
Loading ...
Loading ...