Loading ...
Loading ...
Loading ...
41
AXIS 240Q - System Options
QoS Settings
For each type of network traffic supported by your Axis network video product, enter a
DSCP (Differentiated Services Codepoint) value. This value is used to mark the traffic’s IP
header. When the marked traffic reaches a network router or switch, the DSCP value in the
IP header tells the router or switch which type of treatment to apply to this type of traffic,
for example, how much bandwidth to reserve for it.
Note that DSCP values can be entered in decimal or hex
form, but saved values are always
shown in decimal.
For more infomation on Quality of Service, please
see the Axis support web at
www.axis.com/techsup
SMTP (email)
Enter the host names or addresses for your primary and secondary mail servers in the fields
provided, to enable event and error email messages from the video server to predefined
addresses, via SMTP. If the mail server requires SMTP authentication, check the box for
Use authentication to log in to this server and enter the user name and password used for
logging in. Several different methods of authentication are available. See the online help
for more information.
SNMP
The Simple Network Management Protocol (SNMP) allows the remote management of
network devices. Select the version of SNMP to use, depending on the level of security
required. Select the version of SNMP to use, by checking the appropriate box. The three
levels of security are:
• SNMP V1 - includes no security
• SNMP V2c - uses very simple security, e.g. community name as password
• SNMP V3 - provides encryption and secure
passwords. Use with HTTPS.
If using V1 and V2c, enter the community name for read-only access to all supported
SNMP
objects (except the root password and other objects that require write access).
Default value = public. You can also specify the community name for read/write access to
all supported SNMP objects (except read-only objects). Default value = pass.
If using HTTPS enter the password if it has not already been set. T
o set the password again,
the AXIS 240Q must be reset to the factory default settings.
Network - UPnP™
The video server includes support for UPnP™ in Windows ME and Windows XP. UPnP™ is
enabled by default.
Note:
UPnP™ must be installed on your workstation. To do this, open the Control Panel from the Start Menu and
select Add/Remove Programs. Select Add/Remove Windows Components and open the Networking Ser-
Loading ...
Loading ...
Loading ...