Loading ...
Loading ...
Loading ...
Web-based Switch Configuration
167
2
2.14.5. Copper Test
For copper length diagnostic, click Diagnostic > Copper Test.
Figure 193 - Diagnostics > Logging > Copper Test
Item Description
Port Specify the interface for the copper test.
Copper Test Result
Port The interface for the copper test.
Result
The status of copper test. Including:
●
OK: Correctly terminated pair.
●
Short Cable: Shorted pair.
●
Open Cable: Open pair, no link partner.
●
Impedance Mismatch: Terminating impedance is not in the
reference range.
●
Line Drive
Length
Distance in meter from the port to the location on the cable
where the fault was discovered.
2.14.6. Fiber Module
The Optical Module Status page displays the operational information reported by the Small Form-
factor Pluggable (SFP) transceiver. Some information may not be available for SFPs without the
supports of digital diagnostic monitoring standard SFF-8472.
To display the Optical Module Diagnostic page, click Diagnostic > Fiber Module.
Figure 194 - Diagnostics > Logging>Fiber Module
Loading ...
Loading ...
Loading ...