Loading ...
Loading ...
Loading ...
 
132
Figure 139 - Security > Dynamic ARP Inspection > Property>Edit Port Setting
Item Description
Port Display selected port to be edited.
Trust
Set checkbox to enable/disabled trust of interface. All ARP packet
will be forward directly if enable trust. Default is disabled.
Source MAC
Address
Set checkbox to enable or disable source mac address validation of
interface. All ARP packets will be checked whether sender mac is
same as source mac in Ethernet header if enable source mac
address validation. Default is disabled.
Destination MAC
Address
Set checkbox to enable or disable destination mac address
validation of interface. All ARP packets will be checked whether
target mac is same as destination mac in Ethernet header if enable
destination mac address validation. Default is disabled.
IP Address
Set checkbox to enable or disable IP address validation of interface.
All ARP packets will be checked whether IP address is 0.0.0.0,
255.255.255.255 or multicast address. Default is disabled.
IP Address –
Allow Zero
Set checkbox to enable or disable allow zero of IP address
validation. 0.0.0.0 IP address is valid if allow zero enable. Default is
disabled.
Rate Limit
Input rate limitation of ARP packets. The unit is pps. 0 means
unlimited. Default is unlimited.
Loading ...
Loading ...
Loading ...