Loading ...
Loading ...
Loading ...
22
Dual Zone Status
The dual zone status is a function that transmits the
detected pan size to the display of the cooking zone.
Bridge function
The bridge function allows to create one bigger
cooking zone out of two smaller cooking zones.
The front or left (bigger) cooking zone is the master
cooking zone. The rear or right (smaller) cooking zone
is the slave cooking zone.
Rotate the control knobs of the master cooking zone
and the slave cooking zone to the right overwind
position and hold for 2 seconds. Rotate the control
knob of the slave cooking zone to power level 9 and
rotate the control knob of the master cooking zone to
the preferred power level.
The display of the slave cooking zone shows a bridge
symbol.
Pan Detection
When a zone has been activated but no pan has been
placed on the cook zone, the zone will recognise that
there is no pan in position. It also means the hob
only uses power when a suitable pan is placed on the
zone. This reduces the energy used during the cooking
process, i.e. when you take your pan off the zone
the hob automatically reduces the power, and only
switches back on when you replace the pan.
4
After 10 minutes the cooking zone turns
off. To reactivate the cooking zone, rotate
the control knob to zero.
Child Lock
This feature is to help prevent accidental switching on
of the hob, especially by young children.
Rotate the two most left control knobs to the left
overwind position and hold for 2 seconds to activate
the child lock.
Rotate the two most left control knobs to the left
overwind position and hold for 2 seconds to deactivate
the child lock.
Residual Heat Indications
If the cook zone is switched off and the glass surface
is above 60°C , H will be displayed in the cook
zone display until the glass surface drops below
approximately 55°C.
This feature not only warns you against hot surfaces
but also indicates that there is residual heat which can
be used as temporary warm zone.
4
Note - The cook zone itself does not heat
up, but the ceramic glass does get hot
because of the hot pan conducting heat
back onto the hob glass.
Auto stand by
A cooking zone that has exceeded the maximum
operating time switches off automatically.
To reactivate the cooking zone, rotate the control knob
to zero.
Power management
The power management system manages the power
to all the cooking zones. The latest set cooking zone
is prioritized. If there is no power, the set power level
of a cooking zone will not be displayed. The display
changes when rotating the control knob to the actual
power level.
Overheating status of cooking zone
The overheating status of the cooking zone decreases
the temperature of a cooking zone automatically when
the induction hob overheats.
Rotate the control knob of the cooking zone to the
power level indicated on the display before increasing
the power level.
Warming zone
The induction hob can be equipped with a
conventional low power heating element that can be
used as a warming zone. The warming zone can only
be on and off.
Loading ...
Loading ...
Loading ...