Loading ...
Loading ...
Loading ...
6
bl e n d i n g i n t h e fu l l Si z e co n tai n e r (64 o u n c e /2.0 l)
CAUTION
To Avoid Possible Burns, Never Start on Speeds Above 1 when Processing Hot Liquids.
Escaping steam, splashes or contents may burn.
To secure the contents, lock the lid and lid plug securely in place prior to operating the blender.
Always start on Variable 1, then slowly increase to 10.
NEVER touch moving parts
Parts will become hot with extended use. DO NOT touch the drive socket in the blender base or the drive spline in the
blade base
Note: The On/O switch is on the right hand side of the base.
1. Press the On/O switch to the On (I) position.
Three dashes (- - -) will display on the control panel if a container is not on the blender base. Once a container is placed, 0:00
will show on the display.
Liquids
Dry Goods
Leafy Greens
Fruits & Veggies
Ice & Frozen
Ingredients
2. Load your container according to the Vitamix recipe directions or the load order
illustration here.
IMPORTANT! Always use the lid and the lid plug on the Full-Size Containers when
the machine is in operation. Never operate the blender without checking to make
sure that the lid and lid plug are securely locked in place.
3. Put the lid onto the container.
a. Push down on the lid until the two tabs snap onto the lip of the container.
b. Insert the lid plug.
c. Turn the lid plug clockwise to lock.
4. Put the container onto the blender base. 0:00 will display when a container/cup
is detected and the blender is ready to operate.
5. Turn the variable speed dial to Variable Speed 1.
6. Press Start/Stop. The blades will begin to turn and the timer will count the
minutes and seconds that the blend has been processing. To set a blend time, use the +/- icons on the controls.
7. Rotate the Variable Speed Dial between 1 and 10 during the blending cycle to increase or decrease the speed of the blades.
8. At the end of the blend, rotate the Variable Speed Dial counter-clockwise until Variable 1 is displayed and press Start/Stop.
9. If the mixture stops circulating:
• Insert the tamper through the lid plug and stir until it ‘burps’. If this does not work, press the On/O switch to stop the
motor. Remove the container from the blender base and use a rubber spatula to press the air bubble away from the blades.
Add liquid if necessary. Replace the lid and lid plug. Return the container to the blender base and continue blending.
• If necessary, use a Vitamix Blade Scraper or spatula to remove salsa, jelly, jam, peanut butter, and other thick ingredients
from under the blades only after the blender has been turned o and the container has been removed from the motor base.
10. After blending, wait until the blades completely stop before removing the lid or removing container from the blender base.
Tips to prevent ‘overloading’ your blender:
• Process only Vitamix recipes when learning to use the blender.
• Do not process recipes at lower speeds than recommended.
• Do not process recipes at higher speeds than recommended.
• Do not process recipes for longer than recommended.
• Use your tamper to process thicker mixtures and keep ingredients moving around and through the blades.
Loading ...
Loading ...
Loading ...