Loading ...
Loading ...
Loading ...
4
pa rtS a n d fe at u r e S
OFF
ON
On/O Switch
Blender with Variable Speed
Pulse
Technology - The blender, containers and cups communicate through wireless technology.
Each container is programmed to run on the blender base for optimum performance
according to it’s size and functionality.
Legacy Vitamix Containers - Legacy Vitamix containers will not work with your Venturist
blender base. Legacy machines are Vitamix C Series, G Series and S Series. For more
information about Vitamix products, please go to vitamix.com.
On /O (I/O) Switch - The On/O switch (I/O) is located on the right side of the blender base.
The On/O switch controls power to the machine.
Sleep Mode - The blender will enter sleep mode if the control panel is not used after
30 seconds. The screen will dim. To exit sleep mode, rotate the variable speed dial to the
desired speed for your next blend.
Container Detect - Three dashes (- - -) will display on the control panel if a container is not
on the blender base. Once a container is placed, 0:00 will show on the display.
Start/Stop ( I ) - Stop the blender at any time by pressing Start/Stop ( I ) .
Variable Speed Dial - The Variable Speed Dial gives you manual control from Variable 1
(slowest) to 10 (highest).
Pulse ( ) - The blades will rotate at the speed displayed on the control panel when
pressed.
Display - The timer will count up when using variable speed until Start/Stop is pressed.
Each container is programmed with a specific maximum run time. The blender will shut
down automatically when the maximum run time has elapsed.
Error Codes - If you see an error code on the display make note of the numbers on the
display after the error code. Call Vitamix Customer Service for help with the issue.. Recording
the numbers isn’t necessary, but will give the Customer Service team more information to
help with the issue.
Motor - The motor is designed to protect itself from overheating. If the blender will not start
immediately check to make sure you have plugged the unit in and the On/O switch is On.
If the motor has overheated, allow the motor to cool for 20-45 minutes.
Tips to prevent ‘overloading’ your blender:
Process only Vitamix recipes when learning to use the blender. Do not process recipes at lower
speeds than recommended. Do not process recipes at higher speeds than recommended.
Do not process recipes for longer than recommended. Use your tamper to process thicker
mixtures and keep ingredients moving around and through the blades.
Tamper - Lids and tampers are not interchangeable between dierent container styles,
types and sizes. Use the tamper that was supplied with your blender.
The container should not be more than two-thirds full when the tamper is used.
Variable
Speed Dial
Start/
Stop
Timer
Loading ...
Loading ...
Loading ...