Loading ...
Loading ...
Loading ...
183
The lights flash to indicate that settings are transferring to the flash drive. When the lights stop
flashing, the projector turns off.
Caution: Do not unplug the power cord or remove the flash drive while the lights are flashing. This
could damage the projector.
5. Remove the flash drive.
Note: The file name for the batch setup file is PJCONFDATA.bin. If you need to change the file
name, add text after PJCONFDATA using only alphanumeric characters. If you change the
PJCONFDATA section of the file name, the projector may not be able to recognize the file correctly.
Parent topic: Copying Menu Settings Between Projectors
Transferring Settings from a USB Flash Drive
After saving projector settings to a USB flash drive, you can transfer them to another projector of the
same model.
Note: Make sure the USB flash drive contains only a single settings transfer from another projector of
the same model. The settings are contained in a file called pjconfdata.bin. If the drive contains other
files, the transfer may not complete correctly.
Do not adjust image settings on a projector until after you transfer settings to it. Otherwise, you may have
to repeat your adjustments.
1. Turn off the projector and unplug the power cord from the projector's power inlet.
Loading ...
Loading ...
Loading ...