Loading ...
Loading ...
Loading ...
Sarix® Multi Pro Camera Installation Manual
C6715M | 01/24/22
39
Note: If the device cannot obtain an IP address from a DHCP server, it will use Zero Configuration
Networking (Zeroconf) to choose an IP address. When set using Zeroconf, the IP address is in the
169.254.0.0/16 subnet.
The IP address settings can be changed using one of the following methods:
l Device's web browser interface: http://<camera IP address>/.
l Network Video Management software application (for example, the Pelco VideoXpert software).
l ARP/Ping method. For more information, see Setting the IP Address Using the ARP/Ping Method.
Accessing the Live VideoStream
Live video stream can be viewed using one of the following methods:
l Web browser interface: http://< camera IP address>/.
l Network Video Management software application (for example, the Pelco VideoXpert software).
Installing the Sarix Multi Pro Camera Base to a Surface Mount
After the cable connections have been made, mount the Sarix Multi Pro camera base into the surface
mount adapter.
1. (Recommended) Attach a safety lanyard from the surface mount adapter to the lanyard anchor on
the camera base to prevent the camera from falling. See Connecting Cables.
2. Push the camera base into the surface mount adapter so that the 3 setscrews in the camera base
align with the screw holes in the surface mount adapter.
3. Use a screwdriver to turn the 3 setscrews clockwise by 90° and secure the camera to the surface
mount adapter.
Loading ...
Loading ...
Loading ...