Siegen S01224 Tool Kit Cordless Drill 101 PC User Manual

18V Ø10MM CORDLESS HAMMER DRILL/

DRIVER

MODEL NO: S01224.01

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these

instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR

PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY

1.1. ELECTRICAL SAFETY FOR BATTERY CHARGER

 WARNING! It is the user’s responsibility to check the following:

9 Check all electrical equipment and appliances to ensure that they are safe before using.

Inspect power supply leads, plugs and all electrical connections for wear and damage.

Ensure that the insulation on all cables and on the appliance is safe before connecting it to the power supply.

8 DO NOT use worn or damaged cables, plugs or connectors.

 Ensurethatanyfaultyitemisrepairedorisreplacedimmediatelybyaqualiedelectrician.

 Ifthecableorplugisdamagedduringuse,switcho󰀨theelectricitysupplyandremovefromuse.

 Ensurethatrepairsarecarriedoutbyaqualiedelectrician.

 SealeyrecommendthatanRCD(ResidualCurrentDevice)isusedwithallelectricalproducts.

 Important:Ensurethatthevoltageratingontheappliancesuitsthepowersupplytobeusedandthattheplugisttedwiththe

correct fuse.

8 DO NOT pull or carry the appliance by the power cable.

8 DO NOT pull the plug from the socket by the cable.

1.2. GENERAL POWER TOOL SAFETY WARNINGS

 WARNING! Readallsafetywarnings,instructions,illustrationsandspecicationsprovidedwiththispowertool.Failuretofollowall

 instructionslistedbelowmayresultinelectricshock,reand/orseriousinjury.

9  Saveallwarningandsafetyinstructionsforfuturereference.

1.3. WORK AREA SAFETY

9  Keepworkareacleanandwelllit.Clutteredordarkareasinviteaccidents.

8 DO NOT operatepowertoolsinexplosiveatmospheres,suchasinthepresenceofammableliquids,gasesordust.Powertools

create sparks which may ignite the dust or fumes.

9 Keep children and bystanders away whilst operating a power tool. Distractions can cause you to lose control.

1.4. ELECTRICAL SAFETY

9  Powertoolplugsmustmatchtheoutlet.Nevermodifythepluginanyway.Donotuseanyadaptorplugswithearthed(grounded)

 powertools.Unmodiedplugsandmatchingoutletswillreduceriskofelectricshock.(Thisstatementisinrespectofthebattery 

 charger.)

9  Avoidbodycontactwithearthedorgroundedsurfaces,suchaspipes,radiators,rangesandrefrigerators.Thereisanincreasedrisk

of electric shock if your body is earthed or grounded.

8 DO NOT expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

1.5. PERSONAL SAFETY

9 Stay alert, watch what you are doing and use common sense when operating a power tool.

8 DO NOT useapowertoolwhilstyouaretiredorundertheinuenceofdrugs,alcohol,ormedication.Amomentofinattentionwhilst

 operatingpowertoolsmayresultinseriousinjury.

9  Usepersonalprotectiveequipment.Alwaysweareyeprotection.Protectiveequipmentsuchasdustmask,non-skidsafetyshoes,

 hardhatorhearingprotectionuseforappropriateconditionswillreducepersonalinjuries.

9  Preventunintentionalstarting.Ensuretheswitchisintheo󰀨positionbeforeconnectingtopowersourceand/orbatterypack,picking

 uporcarryingthetool.Carryingpowertoolswithyourngersontheswitchorenergisingpowertoolsthathavetheswitchoninvites

accidents.

9  Removeanyadjustingkeyorwrenchbeforeturningthepowertoolon.Awrenchorakeyleftattachedtoarotatingpartofthepower

 toolmayresultinpersonalinjury.

8 DO NOT overreach.Keepproperfootingandbalanceatalltimes.Thisenablesbettercontrolofthepowertoolinunexpected 

situations.

9 Dress properly. DO NOT wearlooseclothingorjewellery.Keepyourhairandclothingawayfrommovingparts.Looseclothes, 

 jewelleryorlonghaircanbecaughtinmovingparts.

9  Ifdevicesareprovidedfortheconnectionofdustextractionandcollectionfacilities,ensuretheseareconnectedandproperlyused.

 Useofdustcollectioncanreducedust-relatedhazards.

8 DO NOT let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A

 carelessactioncancausesevereinjurywithinafractionofasecond.

S01224.01Issue208/12/23

Original Language Version

Refer to

instructions

Wear eye

protection

Wearprotective

gloves

Wear ear

protection

Wear safety

footwear

Wearprotective

clothing

1.6. POWER TOOL USE AND CARE

8 DO NOT forcethepowertool.Usethecorrectpowertoolforyourapplication.Thecorrectpowertoolwilldothejobbetterand 

safer at the rate for which it was designed.

8 DO NOTusethepowertooliftheswitchdoesnotturnitonando󰀨.Anypowertoolthatcannotbecontrolledwiththeswitchis 

dangerous and must be repaired.

9  Removethebatterypack,ifdetachable,fromthepowertoolbeforemakinganyadjustments,changingaccessories,orstoringpower

 tools.Suchpreventivesafetymeasuresreducetheriskofstartingthepowertoolaccidentally.

9 Store idle power tools out of the reach of children and do not allow persons unfamiliar with these power tools or these instructions

 tooperatethepowertool.Powertoolsaredangerousinthehandsofuntrainedusers.

8 DO NOTstorethebattery(ordrill)inlocationswherethetemperaturemayexceed104°F(40°C)suchasoutsidesheds,above 

heaters, or metal buildings in summer.

9  Maintainpowertoolsandaccessories.Checkformisalignmentorbidingofthemovingparts,breakageofpartsandanyother 

 conditionthatmaya󰀨ectthepowertool’soperation.

9  Ifdamaged,havethepowertoolrepairedbeforeuse.Manyaccidentsarecausedbypoorlymaintainedpowertools.

9  Keepcuttingtoolssharpandclean.Properlymaintainedcuttingtoolswithsharpcuttingedgesarelesslikelytobindandareeasier

to control.

9 Use the power tool, accessories and tool bits etc, in accordance with these instructions, taking into account the working conditions

 andtheworktobeperformed.Useofthepowertoolforoperationsdi󰀨erentfromthoseintendedcouldresultsinahazardous 

situation.

9  Securelooseworkpieceswithaclamp,viceorotheradequateholdingdevice.

9 Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow

for safe handling and control of the tool in unexpected situations.

1.7. SERVICE

9 Replace or repair damaged parts. Use an authorised service agent and recommended parts only. Unauthorised parts may be

dangerous and will invalidate the warranty.

9  Haveyourpowertoolservicedbyaqualiedrepairpersonusingonlyidenticalreplacementparts.Thiswillensurethatthesafetyof

the power tool is maintained.

9  Neverservicedamagedbatterypacks.Serviceofbatterypacksshouldonlybeperformedbythemanufacturerorauthorised 

 serviceproviders.

1.8. BATTERY TOOL USE AND CARE

9  Rechargeonlywiththechargerspeciedbythemanufacturer.Achargerthatissuitableforonetypeofbatterypackmaycreatea

 riskofrewhenusedwithanotherbatterypack.

9  Usepowertoolsonlywithspecicallydesignatedbatterypacks.Useofanyotherbatterypacksmaycreateariskofinjuryandre.

9  Whenbatterypackisnotinuse,keepitawayfromothermetalobjects,likepaperclips,coins,keys,nails,screws,orothersmall

 metalobjects,thatcanmakeaconnectionfromoneterminaltoanother.Shortingthebatteryterminalstogethermaycauseburnsor

 are.

9  Underabusiveconditions,liquidmaybeejectedfromthebattery;avoidcontact.Ifcontactaccidentlyoccurs,ushwithwater.If 

 liquidcontactseyes,additionallyseekmedicalhelp.Liquidejectedfromthebatterymaycauseirritationorburns.

8 DO NOTuseabatterypackortoolthatisdamagedormodied.Damagedormodiedbatteriesmayexhibitunpredictable 

 behaviourresultinginre,explosionorriskofinjury.

8 DO NOTexposeabatterypackortooltoreorexcessivetemperature.Exposuretoreortemperatureabove130°Cmaycause

explosion.

9  Followallcharginginstructionsanddonotchargethebatterypackortooloutsidethetemperaturerangespeciedinthe 

 instructions.Chargingimproperlyorattemperaturesoutsidethespeciedrangemaydamagethebatteryandincreasetheriskof

 re.

1.9. DRILL SAFETY WARNINGS

9 Hold the power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden

 wiring.Cuttingaccessorycontactinga“live”wiremaymakeexposedmetalpartsofthepowertool“live”andcouldgivetheoperator

an electric shock.

9  Neveroperateataspeedhigherthanthemaximumspeedratingofthedrillbit.Athigherspeeds,thebitislikelytobendifallowedto

 rotatefreelywithoutcontactingtheworkpiece,resultinginpersonalinjury.

9 Always start drilling at low speed and with the bit tip in contact with the workpiece.

9  Applypressureonlyindirectlinewiththebitanddonotapplyexcessivepressure.Bitscanbendcausingbreakageorlossof 

 control,resultinginpersonalinjury.

1.10. BATTERY CHARGER SAFETY INSTRUCTIONS

 Childrenfromage8yearsandabove,personswithreducedphysical,sensory,ormentalcapabilitiesthosewithlackofexperienceand

 knowledgecanusetheappliance,iftheyhavebeengivensupervisionorinstructionconcerninguseoftheapplianceinasafewayto

 understandthehazardsinvolved.

 ChildrenshallNOTplaywiththeappliance

 Cleaningandusermaintenanceontheapplianceshallnotbemadebychildrenwithoutsupervision.

9  Theapplianceshallbedisconnectedfromitspowersourceduringserviceandwhenreplacingpartsand,ifthattheremovaloftheplug

 isforeseen,itshallbeclearlyindicatedthattheremovaloftheplughastobesuchthatanoperatorcancheckfromanyofthepointsto

 whichhehasaccessthattheplugremainsremoved.

2. INTRODUCTION

Compact,lightweightdesignpoweredbylithium-ionbatterytechnologywhichgivesanall-roundbetterperformancethanstandardNi-Cd/Ni-

MHcells.Compositehousingwithbuilt-inLEDbatterylevelindicatorandLEDworklight.10mmKeylesschuckwithaddedhammerfunction.

Twospeedsettingsand18torquesettingsallowscontrolwhentighteningscrews.Featuresametalbeltclipforsaferstoragewhilenotinuse.

Supplied in storage case with battery and mains charger.

Original Language Version

S01224.01Issue208/12/23

3. SPECIFICATION

MODEL NO: .........................................................S01224.01

Battery: ........................................................18V1.5AhLi-ion

No Load Speed: ..........................................0-350/0-1250rpm

Impact Rate: ..........................................0-5250/0-19500bpm

Drilling Capacities:

Wood: ..........................................................................20mm

Metal: ...........................................................................10mm

Concrete: ..................................................................... 10mm

ChuckSize: ..................................................................10mm

MaximumTorque:..........................................................31Nm

4. OPERATION

 IMPORTANT WARRANTY INFORMATION:

Thebatterypackfittedtothiscordlesstoolisconsideredtobeaconsumableitemanditsabilitytoacceptchargewillreduceover 

 time.Wewillwarrantyitagainstmechanicalandelectricaldefectforaperiodofoneyear-thisdoesnotcoverfairwearandtear.Ifthe

battery is not properly charged before first use, or regularly conditioned, its capacity will diminish. Under these circumstances we will

 notreplacethebatterypackevenifitislessthanoneyearold.

4.1. BATTERY CHARGING

4.1.1.  Plugthechargerintoamainselectricsocket.Whenswitchedon,thechargerLEDwilldisplaygreen.

4.1.2.  Toreleasethebatterypressthebatterylatchandslidethebatteryforward.

4.1.3.  Slidethebatteryintothecharger(g.2).ThechargerLEDwilldisplayasteadyred,toshowthatchargingistakingplace.

4.1.4. When the battery is fully charged, a green light will return. Allow the battery to cool before use.

4.1.5. Replace the battery in the drill, sliding in until secured by the latch.

NOTE: Whennew,thebatterymayhavebeenshippedinalowchargestate.Itwilltakelongertochargethebatteryinitiallyandseveral 

subsequent charges may also take a little longer, compared with when the battery reaches its optimum performance.

8 DO NOTchargeasecondbatteryimmediately.Consecutivechargingwilloverheatthecharger.Allowtheunittocoolfor15minutes

before

charging the next battery.

8 DO NOT

attempt to connect two chargers together.

4.2. USING THE DRILL(g.1)

4.2.1. Ensurethatyouhaveread,understoodandcomplywithallthesafetyinstructionsinSection1.

4.2.2.  Ensurethedirectionswitchisinthemid(lock)position.Openthechuckandinserttherequireddrillorscrewdriverbit.

4.2.3.  Selecthighorlowspeedbyusingtheselectorontopofthecasing(highspeedfordrilling,lowforhammerorscrewdriving).

4.2.4.  Selectthedirectionofrotationbymeansoftheforward/reverseselector.

4.2.5. Select hammer, screw or drill by turning the selector ring.

4.2.6.  Ifdrivingscrews,settherequiredtorquebymeansofthetorqueselectorring.1isthelowesttorquesetting.

4.2.7.  TheLEDworklightislitwheneverthetriggerisdepressed.

4.2.8.  Whenthetriggerisdepressed,thechargeleveldisplay,onthedrillbody(fig.1)isalsoilluminated.Whengreen,amberandredlights

 areshowing,thechargelevelishealthy.Asthechargeleveldrops,theindicatorlightsgooutprogressively.Whenjusttheredlightis

showing, the battery requires recharging.

4.2.9.  Whenfinished,removethebit,cleanthedrillandbitandreplacethedrillinitscase.

4.2.10. Store in a cool, dry place out of the reach of children.

Replacement battery ............................................. S01224.02

Replacement charger ............................................S01224.03

Noise power: ...................................................... 95dB(A)Lwa

Noise pressure: .................................................. 84dB(A)Lwa

Vibration: ................................................................2.242m/s²

Uncertainty: ................................................................1.5m/s²

Original Language Version

g.1

g.2

S01224.01Issue208/12/23

 WARNING! – Risk of Hand Arm Vibration Injury.

 Thedeclaredvibrationtotalvalue(s)andthedeclarednoiseemissionvalue(s)havebeenmeasuredinaccordancewithastandardtest

 methodandmaybeusedforcomparingonetoolwithanother.Thedeclaredvibrationtotalvaluesandthedeclarednoiseemissionvalues

 mayalsobeusedinapreliminaryassessmentofexposure.Thevibrationandnoiseemissionsduringactualuseofthepowertoolcan

 differfromthedeclaredvaluesdependingonthewaysinwhichthetoolisused,especiallywhatkindofworkpieceisprocessed.

 Theneedtoidentifysafetymeasurestoprotecttheoperatorthatarebasedonanestimationofexposureintheactualconditionofuse.

This tool may cause Hand Arm Vibration Syndrome if its use is not managed adequately.

 ThistoolissubjecttothevibrationtestingsectionoftheMachineryDirective2006/42/EC.

 Thistoolistobeoperatedinaccordancewiththeseinstructions.

Measured vibration emission value (a): 2.242 m/s²

Uncertainty value (k):1.5 m/s²

 Pleasenotethattheapplicationofthetooltoasolespecialisttaskmayproduceadifferentaveragevibrationemission.Werecommend

 thataspecificevaluationofthevibrationemissionisconductedpriortocommencingwithaspecialisttask.

 Ahealthandsafetyassessmentbytheuser(oremployer)willneedtobecarriedouttodeterminethesuitabledurationofuseforeach

tool.

 NB:StatedVibrationEmissionvaluesaretype-testvaluesandareintendedtobetypical.

 Whilstinuse,theactualvaluewillvaryconsiderablyfromanddependonmanyfactors.

 Suchfactorsinclude;theoperator,thetaskandtheinsertedtoolorconsumable.

 NB:ensurethatthelengthofleaderhosesissufficienttoallowunrestricteduse,asthisalsohelpstoreducevibration.

 Thestateofmaintenanceofthetoolitselfisalsoanimportantfactor,apoorlymaintainedtoolwillalsoincreasetheriskofHandArm

Vibration Syndrome.

Health surveillance.

 Werecommendaprogrammeofhealthsurveillancetodetectearlysymptomsofvibrationinjurysothatmanagementprocedurescanbe

modified accordingly.

Personal protective equipment.

 Wearenotawareofanypersonalprotectiveequipment(PPE)thatprovidesprotectionagainstvibrationinjurythatmayresultfromthe

 uncontrolleduseofthistool.Werecommendasufficientsupplyofclothing(includinggloves)toenabletheoperatortoremainwarmand

 dryandmaintaingoodbloodcirculationinfingersetc.Pleasenotethatthemosteffectiveprotectionisprevention,pleaserefertothe

 CorrectUseandMaintenancesectionintheseinstructions.Guidancerelatingtothemanagementofhandarmvibrationcanbefoundon

 theHSEwebsite:www.hse.gov.uk-Hand-ArmVibrationatWork.

Original Language Version

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR

01284 757500 sales@sealey.co.uk www.sealey.co.uk

ENVIRONMENT PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to

arecyclingcentreanddisposedofinamannerwhichiscompatiblewiththeenvironment.Whentheproductbecomescompletely

unserviceableandrequiresdisposal,drainanyfluids(ifapplicable)intoapprovedcontainersanddisposeoftheproductandfluids

according to local regulations.

WEEE REGULATIONS

DisposeofthisproductattheendofitsworkinglifeincompliancewiththeEUDirectiveonWasteElectricalandElectronicEquipment

(WEEE).Whentheproductisnolongerrequired,itmustbedisposedofinanenvironmentallyprotectiveway.Contactyourlocalsolid

waste authority for recycling information.

PURCHASE HERE

BATTERY REMOVAL

UndertheWasteBatteriesandAccumulatorsRegulations2009,JackSealeyLtdarerequiredtoinformpotentialpurchasersofproducts

containingbatteries(asdefinedwithintheseregulations),thattheyareregisteredwithValpak’sregisteredcompliancescheme.Jack

SealeyLtd’sBatteriesProducerRegistrationNumber(BPRN)isBPRN00705.

Note:Itisourpolicytocontinuallyimproveproductsandassuchwereservetherighttoalterdata,specificationsandcomponent

parts without prior notice. Pleasenotethatotherversionsofthisproductareavailable.Ifyourequiredocumentationforalternative

versions,pleaseemailorcallourtechnicalteamontechnical@sealey.co.ukor01284757505.

Important: No Liability is accepted for incorrect use of this product.

Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.

S01224.01Issue208/12/23

Siegen S01224 Tool Kit Cordless Drill 101 PC

Product's Documents

User Manual

Specifications

Siegen S01224 Questions and Answers