Loading ...
Loading ...
Loading ...
12 13
Screw in the Corner
or Wedge Mount.
Using the short bracket screws,
secure the Corner or Wedge
Mount to the wall.
You’ll use the 1" mounting screws
to attach your Doorbell to the
bracket later.
DO NOT USE any screw other than
the included 1" mounting screws when
securing your Ring Doorbell.
If you need both
vertical and horizontal
adjustment, you can
stack the Corner and
Wedge Mounts and
mount them both
with the medium or
long bracket screws.
Connect the doorbell wires.
Loop one doorbell wire around
each of the screw terminals on the
rear of your Ring Doorbell then
tighten the terminals to secure.
If your doorbell wires are too
short to reach your new Ring
Doorbell, you can attach the
included wire extenders using
the included wire nuts.
Loading ...
Loading ...
Loading ...