Loading ...
Loading ...
Loading ...
Symptom
Possible Cause
Solution
BURNER FLAME
Low gas
Contact gas company.
GOES OUT AT
LOW SETTING
pressure.
Air in take
holes around
burners are
obstructed.
Remove obstruction from air
intake holes. Simmer setting
is to low
THE FLAME SHAVE
SUDDENLY
GONE OUT
A draft or spill Has
extinguished the
flame.
Turn the burners off, cleaning
the burners
And sump area. See “Care an
d
Cleaning” for instructions.
Once clean reignite top
burners.
NO IGNITION
SPARK
Dead batteries
Or ignition
module failed.
Replace batteries and
attempt ignition. If There is
still no spark ignition, the
range top burner scan still
be used.
To light them:
1.) Holding a lit match to the
flame spreader, pushing
on the control knob and
turn counter clock wise to
LIGHT.
2.) When the flame is
burning all the way
around the burner, you
may adjust the heat.
“CRACKING”
This is the sound
This is normal.
OR
“POPPING”
SOUND IS
Of metal heating
and cooling.
COMING FROM
RANGE TOP
27
Loading ...