Loading ...
Loading ...
Loading ...
VIVOTEK
User's Manual - 55
Please follow the steps below to set up a prole:
1. Select the Prole mode tab.
2. Select the applicable mode: Night mode or
Schedule mode. Please manually enter a range of
time if you choose the Schedule mode.
3. Congure Exposure control settings in the folowing
columns. Please refer to previous dicussions for
detailed information.
4. Click Save to enable the setting and click Close to
exit the page.
You can click Restore to recall the original settings without incorporating the changes. When
completed with the settings on this page, click Save to enable the settings.
If you want to congure another sensor setting for day/night/schedule mode, please click Prole to
open the Prole of exposure settings page as shown below. Note that when the Day/night lter is
set to Auto, the Exposure Prole mode will be disabled.
Activated period:
Select the mode this prole to apply to: Night mode or Schedule mode. Please
manually enter a range of time if you choose Schedule mode. Then check Save to take effect.
Enable WDR enhanced:
This function allows users to identify more image details with an extreme
contrast from an object of interest with one shadowed side against a bright background, e.g., an
entrance. You may select the Enable WDR enhanced checkbox, and then adjust the strength (low,
medium, high) to reach the best image quality.
Loading ...
Loading ...
Loading ...