Loading ...
2
Ring Glass Break Sensor
Introduction
Ring Alarm Glass Break Sensor is a wireless sensor for the Ring Alarm system which provides users the
ability to know when breaking glass is detected. After installing the sensor on a wall, ceiling or shelf
and setting up the sensor in the Ring app, monitor and receive notifications when breaking glass is
detected. The Ring Alarm Base Station is required to enable Glass Break Sensor features and functions
within the Ring app.
Note:
• This product can be operated in any Z-Wave™ network with other Z-Wave certified devices from
other manufacturers. All mains operated nodes within the network will act as repeaters regardless of
vendor to increase reliability of the network.
• SmartStart enabled products can be added into a Z-Wave network by scanning the Z-Wave QR Code
present on the product with a controller providing SmartStart inclusion. No further action is required
and the SmartStart product will be added automatically within 10 minutes of being switched on in
the network vicinity.
Ring Glass Break Sensor – Basic Setup & Installation
1. Ensure your Ring Alarm system is disarmed.
2. In the Ring app, tap Set Up a Device > Security > Sensors to find the Glass Break Sensor
3. Follow the in-app instructions to complete setup.
Installation
1. Choose a wall or ceiling or shelf for installing your Glass Break Sensor.
2. Ensure the surfaces where you plan to install your sensor are clean and free from dust or dirt.
3. Using the provided double-sided tape, peel the backing and attach the sensor to the
mounting location.
Note:
• It is recommended to mount the Glass Break Sensor at least 7’ (2m) o the ground, and within
25 feet (7.62m) of your glass windows and doors.
Loading ...
Loading ...
Loading ...