Loading ...
Loading ...
Loading ...
8 | AI Box User Manual
Hardware Reset
The reset button is used to reset the system or restore the factory default settings�
Sometimes resetting the system can return the camera to normal operation� If the
system problems remain after reset, restore the factory settings and install again�
Use a atten paper clip to press the button.
Reset: Press the recessed reset button� Wait for the Network Camera to reboot�
Restore: Press and hold the reset button until the status LED rapidly blinks� Note that all
settings will be restored to factory default� Upon successful restore, the status LED will
blink green and red during normal operation�
Prerequisites
Hardware:
• Azena Enabled camera�
• A host computer (Windows/Linux/Mac/Ubuntu) with Google Chrome browser�
• Local network (e�g� router and cables) to connect the camera and the host computer�
• POE – Power Over Ethernet (via router, hub or PoE adapter) to power the camera�
Network:
• Network with connectivity to internet (ofine camera supported: not described in this
document)�
• DHCP Network (Using DHCP the camera automatically receives the IP address once
connected to a network)�
Software:
• Ecosystem credentials used across application store and Device Management
Portal� Additionally you can also invite your colleagues to the account via the User
Management�
• Download Azena Device Management tool from the resources section and install
on the host computer� The tool can be used for device discovery and installing
applications on cameras in ofine network.
• Our devices communicate to the external URLs which needs to be allowed in the
network rewall – details can be found in the resources section to the left.
Loading ...
Loading ...
Loading ...