Loading ...
Loading ...
Loading ...
Before You Start
If your device supports AI by NVR funcon, and its corresponding funcons are required, please go
to System → Smart Sengs → Algorithm Conguraon → Algorithm Management to enable
Perimeter Protecon algorithm.
Steps
Note
A part of the following steps are only available for certain NVR or camera models.
1. Go to Event Center → → Event Conguraon → Perimeter Protecon.
2. Select a camera.
3. Oponal: Turn on Enable AI by NVR.
The device will analyze the video, and cameras only transmit video stream.
4. Select Region Entrance.
5. Turn on Enable.
Figure 13-3 Region Entrance Detecon
6. Click Rule Sengs to detecon rules.
1) Select a rule number. For example, select 1.
2) Click , and click on the image 4 mes respecvely to draw each point of a quadrilateral
area.
3) Set Sensivity and Detecon Target.
Sensivity
The higher the value is, the more easily the detecon alarm can be triggered.
Network Video Recorder User Manual
61
Loading ...
Loading ...
Loading ...