Loading ...
Loading ...
Loading ...
Note
●
Protocol Name and Path can be automacally generated if you click a brand name below
Protocol Name.
●
You can disable sub-stream if the camera does not support sub-stream or does not have to
use the sub-stream.
5. Click OK.
6. Click Add in System → Device Access → Device → Video Device to manually add a network
camera.
6.1.6 Add Network Camera through Camera Conguraon File
The informaon of added network cameras can be exported, including the IP address, port,
password of admin, etc. And the exported camera conguraon le content can be edited on your
computer. Aer eding, the le can also be imported to other devices to add the cameras in the
le.
Before You Start
Connect your video recorder to a USB ash drive that contains camera conguraon le in it.
Steps
1. Go to System → Device Access → Device → Video Device .
2. Click Import to import the conguraon le in USB ash drive.
3. Set the folder path.
4. Click Conrm.
6.2 Add Access Control Device
Access control devices can be added to your video recorder.
The adding process is similar with Access Video Device .
6.3 Add Audio Device
Audio devices can be added to your video recorder, such as IP speakers, and microphones.
The adding process is similar with Access Video Device . If you link video channels with an IP
speaker, the IP speaker could be used for voice broadcast. If you link video channels with a
microphone, the microphone would be used as the audio input of the linked video channels for
video recording.
Network Video Recorder User Manual
24
Loading ...
Loading ...
Loading ...