Hikvision DS-K2811 User Manual

Loading ...

9.7.7 Congure Device Parameters

Aer adding the access control device, you can congure the parameters of access control device,

access control points.

Congure Parameters for Access Control Device

Aer adding the access control device, you can congure its parameters, including overlaying user

informaon on picture, uploading pictures aer capturing, saving captured pictures, etc.

Before You Start

Add access control device to the client.

Steps

Click Access Control → Advanced

Funcon → Device Parameters .

Note

If you can not nd Device Parameter in the Advanced Funcon list, hover the cursor on the

Advanced Funcon, and then Click to select the Device Parameter to be displayed.

Select an access device to show its parameters on the right page.

Turn the switch to ON to enable the corresponding

funcons.

Note

●

The displayed parameters may vary for dierent access control devices.

●

Some of the following parameters are not listed in the Basic Informaon page, click More to

edit the parameters.

Enable NFC

If enable the funcon, the device can recognize the NFC card. You can present NFC card on

the device.

Enable M1 Card

If enable the funcon, the device can recognize the M1 card. You can present M1 card on the

device.

Enable EM Card

If enable the

funcon, the device can recognize the EM card. You can present EM card on the

device.

Enable CPU Card

Reserved. If enable the funcon, the device can recognize the CPU card. You can present CPU

card on the device.

Enable ID Card

DS-K281X Series Access Controller User Manual

Loading ...

Hikvision DS-K2811 Access Controller