Loading ...
Loading ...
Loading ...
Input the device user name. By default, the user name is admin.
Password
Input the device password.
Cauon
The password strength of the device can be automacally checked. We highly recommend you
change the password of your own choosing (using a minimum of 8 characters, including at
least three kinds of following categories: upper case leers, lower case leers, numbers, and
special characters) in order to increase the security of your product. And we recommend you
reset your password regularly, especially in the high security system, reseng the password
monthly or weekly can
beer protect your product.
Proper conguraon of all passwords and other security sengs is the responsibility of the
installer and/or end-user.
6.
Oponal: Check Synchronize Device Time to synchronize the device me with the PC running
the client
aer adding the device to the client.
7.
Oponal: Check Export to Group to create a group by the device name.
Note
You can import all the channels of the device to the corresponding group by default.
8.
Oponal: Add the oine devices.
1) Check Add Oine Device.
2) Input the required
informaon, including the device channel number and alarm input
number.
3) Click Add.
When the
oine device comes online, the soware will connect it automacally.
9.
Click Add to add the device.
Import Devices in a Batch
The devices can be added to the soware in batch by inpung the device informaon in the pre-
dened
CSV le.
Perform this task to import devices in a batch.
Steps
1.
Enter the Device Management page
2.
Click Device → Hikvision Device → Add to open the adding device window.
3.
Select Batch Import as the adding mode.
4.
Click Export Template and then save the
pre-dened template (CSV le) on your PC.
5.
Open the exported template
le and input the required informaon of the devices to be added
on the corresponding column.
Adding Mode
DS-K281X Series Access Controller User Manual
35
Loading ...
Loading ...
Loading ...