Loading ...
Loading ...
Loading ...
56-VOLT LITHIUM-ION COMMERCIAL 21" ARTICULATING POLE HEDGE TRIMMER — HTX5300-PA/HTX5300-PA-FC
9
If operating a machine in a damp location is unavoidable, use a ground fault
circuit interrupter (GFCI) protected supply. Use of a GFCI reduces the risk of
electric shock.
PERSONAL SAFETY
Stay alert, watch what you are doing and use common sense when operating
a machine. Do not use a machine while you are tired or under the inuence of
drugs, alcohol or medication. A moment of inattention while operating machines
may result in serious personal injury.
Use personal protective equipment. Always wear eye protection. Protective
equipment such as a dust mask, non-skid safety shoes, hard hat or hearing
protection used for appropriate conditions will reduce personal injuries.
Prevent unintentional starting. Ensure the switch is in the off-position before
connecting to power source and/or battery pack, picking up or carrying the
machine. Carrying machines with your finger on the switch or energizing machines
that have the switch on invites accidents.
Remove any adjusting key or wrench before turning the machine on. A wrench
or a key left attached to a rotating part of the machine may result in personal injury.
Do not overreach. Keep proper footing and balance at all times. This enables
better control of the machine in unexpected situations.
Dress properly. Do not wear loose clothing or jewelry. Keep your hair and
clothing away from moving parts. Loose clothes, jewelry or long hair can be
caught in moving parts.
If devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected and properly used. Use of dust collection
can reduce dust-related hazards.
Do not let familiarity gained from frequent use of machines allow you to
become complacent and ignore machine safety principles. A careless action can
cause severe injury within a fraction of a second.
MACHINE USE AND CARE
Do not force the machine. Use the correct machine for your application.
The correct machine will do the job better and safer at the rate for which it was
designed.
Loading ...
Loading ...
Loading ...