Loading ...
Loading ...
Loading ...
en Installation instructions
58
13.
If required, you can adjust the height of the appli-
ance door using the adjustment screws on the left
and right. To do this, push the intermediate strips
upwards.
Note:The gap between the worktop and the appliance
must not be sealed by additional strips.
Thermal insulation strips must not be fitted to the side
panels of the surround unit.
31.11 For handleless kitchens with vertical
bar handle strips:
1.
Attach a suitable filling piece in order to cover any
sharp edges and to guarantee a safe installation.
2.
Pre-drill aluminium profiles to establish a screw con-
nection.
3.
Secure the appliance using a suitable screw.
31.12 Attaching the fastening elements
In order to attach the panels, the four fastening ele-
ments must be fitted beforehand.
1.
Fold together the fastening element.
2.
Hook in the fastening element at the bottom and
press down at the top until it is in place.
Attach the red fastening elements at the top.
Attach the green fastening elements at the bottom.
Loading ...
Loading ...